V371603 2046013
Service Bulletin Details
Public Details for: V371603 2046013
Direction not to remove the transmission oil cooler from an assembly and to install a new transmission oil cooler when replacing an assembly.
Technical Bulletin Model Year Eng. Code Trans. Code VIN Range From VIN Range To Jetta 2016-2017 1.4T 6 spd. auto All All (CZTA) (09G-AQ250) 1.8T 6 spd. auto All All (CPKA/CPRA) (09G-AQ250) 1.8T 6 spd. auto All All (CXBB) (09G-AQ250) 1.8T 6 spd. auto All All (CPKA/CPRA) (09G-AQ250) Jetta Golf Passat 2014-2017 2015-2017 2014-2017 Condition 37 16 03 November 30, 2016 2046013 Automatic Transmission Fluid (ATF) Cooler, Mandatory Replacement, When Replacing 09G AQ250 Gen III Gearbox Technical Background Gen III versions of the 09G AQ250 transmission do not come from the factory with an ATF oil cooler. Production Solution Information only. Page 1 of 2 © 2016 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Service When replacing a 09G AQ250 Gen III gearbox for any reason, the oil cooler must not be removed from the transmission. A new oil cooler with mounting hardware must be ordered with the replacement gearbox. Not replacing the ATF oil cooler can cause failure of the new transmission and lead to contamination of the old transmission, due to the oil cooler being removed. Note: DO NOT remove the ATF oil cooler from the transmission at any time unless absolutely necessary for diagnosis. Once diagnosis is complete, and if the transmission is to be replaced, the cooler must be reinstalled to ensure the transmission internals are sealed from outside debris. Warranty Information only. Required Parts and Tools Information only. Additional Information All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information. Document Control Revision Table Instance Number Published Date Version Number 2046013/1 11/30/16 V371603 Reason For Update Original publication. Page 2 of 2 © 2016 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.