V151603 2045939
Service Bulletin Details
Public Details for: V151603 2045939
Wear of the camshaft bearing bridge can cause axial movement of the camshaft resulting in faults stored.
Models from 2017
2017 VOLKSWAGEN CC |
2017 VOLKSWAGEN TIGUAN |
Models from 2016
2016 VOLKSWAGEN CC |
2016 VOLKSWAGEN TIGUAN |
Technical Bulletin Model(s) Year Eng. Code Trans. Code VIN Range From: VIN Range To: CC 2016 – 2017 2.0L All AN_GE515911 AN_HE506568 All AX_GK000028 AX_HK010335 All AX_GW089548 AX_HW506411 (CCTA) Tiguan 2016 – 2017 2.0L (CCTA) Tiguan 2016 – 2017 2.0L (CCTA) Condition 15 16 03 November 23, 2016 2045939 MIL ON – DTC P0011 and or P0016 Stored in ECM Fault Memory – Engine May Run Rough At Idle One or more of the following fault codes may be stored in the ECM Fault Memory: DTC Description P0011 Camshaft Position (Bank1) Timing over-advanced or System Performance P0016 Crankshaft Position-Camshaft Position Correlation Bank 1 Sensor A Technical Background Wear of the camshaft bearing bridge can cause axial movement of the camshaft resulting in faults stored. Production Solution Improved valve train components implemented in production. Page 1 of 7 © 2016 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Service Procedure: Inspect rocker arm/bearing saddle for the camshaft and (if necessary) replace parts of valve train Remove the oil filler cap from the valve cover. Using a flashlight, look through the oil filler opening to determine the manufacturer of the rocker arms. See figure 1. Figure 1 Left in figure 1: INA rocker arm (retaining clip not visible) Right in figure 1: GT rocker arm (retaining clip visible, in red) INA rocker arm (illustration 1, left): Rocker arms do not have to be replaced. GT rocker arm (illustration 1, right): Replace the intake rocker arms according to the repair manual. Remove the camshaft bearing bridge according to the repair manual. Check the bearing bridge for damage. (as shown in figure 2). Page 2 of 7 © 2016 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Figure 2) example of worn camshaft bearing bridge If the bridge is damaged as shown in figure 2 the following components must be replaced: Drain the engine oil of the warm engine according to the repair manual. Replace the engine oil filter according to the repair manual. Replace the following components according to the repair manual. Intake camshaft Camshaft bearing bridge Intake camshaft rocker arms (if necessary) Fill up the engine oil according to the repair manual. Note: If the camshaft bearing bridge is not damaged, diagnose the fault entries using Guided Fault Finding. Page 3 of 7 © 2016 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Warranty To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual 1) Model(s) Year(s) Eng. Code(s) Trans. Code(s) VIN Range From CC 2016 – 2017 2.0L VIN Range To All AN_GE515911 AN_HE506568 All AX_GK000028 AX_HK010335 All AX_GW089548 AX_HW506411 (CCTA) 2016 – 2017 Tiguan 2.0L (CCTA) 2016 – 2017 Tiguan 2.0L (CCTA) SAGA Coding Claim Type: Use applicable Claim Type 1) Service Number: 1505 Damage Code 0010 Parts Manufacturer HST Damage Location (Depends on Service No.) -- Use applicable when indicated in Elsa (L/R) Tiguan, CC WWO 2) Tiguan Labor Operation 3) : Charge Battery 27068950 = 10 TU Labor Operation 3) : Remove and Reinstall Rocker Arm 15542090 = 10 TU Labor Operation 3) : Camshafts Remove and Reinstall 15052090 = 290 TU Labor Operation 3) : Chain Housing Cover Remove and Reinstall (upper) 15331940 = 90 TU Labor Operation 3) : Change Oil and Oil Filter 17011799 = 50 TU Page 4 of 7 © 2016 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin CC Labor Operation 3) : Charge Battery 27068950 = 10 TU Labor Operation 3) : Remove and Reinstall Rocker Arm 15542068 = 10 TU Labor Operation 3) : Camshafts Remove and Reinstall 15052068 = 290 TU Labor Operation 3) : Chain Housing Cover Remove and Reinstall (upper) 15331968 = 90 TU Labor Operation 3) : Change Oil and Oil Filter 17011799 = 50 TU Causal Part: 06H 109 021K Diagnostic Time 4) GFF Time expenditure 01500000 = Actual GFF print out YES Road Test 01210004 = 20 TU YES Technical Diagnosis 01320000 = 10 TU max. YES Includes: Inspect Rocker Arms Remove and install oil filler cap Claim Comment: Input “As per Technical Bulletin 2045939” in comment section of Warranty Claim. 1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only 2) Code per warranty vendor code policy. 3) Labor Time Units (TUs) are subject to change with ELSA updates. 4) Documentation required per Warranty Policies and Procedures Manual. Page 5 of 7 © 2016 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Required Parts and Tools Part No: Part Description Quantity G 052 167 M4 Engine Oil 1 06J 115 403Q Oil Filter 1 D 154 103 A1 Sealant 1 N 105 540 05 Bolt 22 N 910 967 01 Bolt 1 WHT 007 212 O-ring 1 06B 103 113C Sealing cap 1 Seal 1 06H 103 144J Bearing Bridge 1 06H 109 021K Inlet Camshaft 1 Rocker Arms (if necessary) 8 06L 103 085B 06E 109 417P Tool Description Tool No: Midtronics Battery Tester/Charger InCharge 940 (INC-940) or GRX3000VAS VAS Diagnostic Tool VAS 6150/X & VAS 6160/X and ODIS Service with: current online updates Page 6 of 7 © 2016 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Additional Information All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information. Document Control Revision Table Instance Number Published Date Version Number 2045939/1 11/23/16 V151603 Reason For Update Original publication. Page 7 of 7 © 2016 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.