T-SB-0192-17

T-SB-0192-17
March 1, 2017
Tire Positioning Before New Vehicle Delivery
Service
Category
General
Section
Pre-Delivery Service
Market USA
Applicability
YEAR(S)
MODEL(S)
2018
4Runner, 86, Avalon, Avalon
HV, C-HR, Camry, Camry
HV, Corolla, Highlander,
Highlander HV, iA, iM, Land
Cruiser, Mirai, Prius, Prius
C, Prius Prime, Prius V,
RAV4, RAV4 HV, Sequoia,
Sienna, Tacoma, Tundra,
Yaris
ADDITIONAL INFORMATION
Introduction
During the manufacturing process, tires are mounted on the vehicle as matched sets to help
reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before
vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the
same direction of rotation.
Refer to the following procedure to ensure that the original tires stay in the same location
on the vehicle.
Warranty Information
OP CODE
N/A
DESCRIPTION
TIME
OFP
T1
T2
–
–
–
–
Not Applicable to Warranty
© 2017 Toyota Motor Sales, USA
Page 1 of 2
T-SB-0192-17
March 1, 2017
Page 2 of 2
Tire Positioning Before New Vehicle Delivery
Repair Procedure
1. Mark the tire installation position on the inward facing tire sidewall.
Example: Front Right = FR, Front Left = FL, Rear Right = RR, Rear Left = RL
2. Install the original tires on the NEW or refinished wheels with the marked side facing inwards.
3. Balance tire/wheel assemblies on the vehicle in the marked positions.
4. Place the tire/wheel assemblies on the vehicle in the marked positions.
NOTE
Torque the wheel nuts to the proper torque value in sequence.
© 2017 Toyota Motor Sales, USA