Toyota Sequoia 2018

• Recall 190548 [USA]: An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
  Toyota motor engineering & manufacturing (toyota) is recalling certain jtekt power steering gear assembly service parts for 2007-2021 tundra and 2008-2022 sequoia, part numbers 44250-0c160, 44250-0c131, 44250-0c170, and 11250-0c121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
  dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on february 17, 2022. Owners may contact toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21th01.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Nhtsa.Gov.

  Show Content

• Recall 145017 [USA]: If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash.
  Toyota motor engineering & manufacturing (toyota) recalled certain 2018-2019 4runner, highlander, camry, land cruiser, sequoia, sienna, tacoma and tundra, and lexus rc 300, rc 350, gs 350, gx 460, is 300, lc 500, ls 500, lx 570, rx 350l, and 2019 toyota avalon and corolla, and certain lexus nx 300, and es 350 vehicles on january 13, 2020. On march 4, 2020, toyota expanded the recall to include certain 2014-2015 toyota 4runner and land cruiser, 2018 avalon, corolla, 2014 fj cruiser, 2017 sienna and lexus 2018 es 350, 2018-2019 gs 300, 2013-2014 gs350, 2014-2015 gx 460, is 350 and lx 570, 2014 is f, 2018-2019 is 350, lc 500h and ls 500h, 2013-2015 ls 460, 2015 nx 200t and rc350, 2017 rc 200t and rx 350. Toyota also removed the 2018-2019 toyota 4runner and land cruiser and 2018-2019 lexus gx 460 and lx 570 and 2019 nx300 from inclusion in this recall. On march 19, 2020, toyota expanded the recall to include 2015 lexus gs350 vehicles. The low-pressure fuel pump inside the fuel tank may fail.
  toyota will notify owners, and dealers will replace the fuel pump, free of charge. The recall began may 4, 2020. Owners may contact toyota customer service at 1-888-270-9371 or lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are 20tb02 and 20ta02 for toyota vehicles and 20lb01 and 20la01 for lexus vehicles.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 134917 [USA]: If the air bags do not deploy as intended, it can increase the risk of injury in a crash.
  Toyota motor engineering & manufacturing (toyota) is recalling certain 2018-2019 toyota tundra and sequoia vehicles and 2019 toyota avalon and avalon hybrid vehicles. The air bag electronic control unit (ecu) may erroneously detect a fault during the vehicle start-up self check. If this occurs, the ecu may not deploy the airbags as intended, in the event of a crash. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 208, "occupant crash protection," and 214, "side impact protection."
  toyota will notify owners, and dealers will update the software for the air bag ecu, free of charge. The recall began october 26, 2018. Owners may contact toyota customer service at 1-888-270-9371. Toyota's number for this recall is j0x. Note: 18v-122 was superseded by this recall. The software remedy also includes the updates to the software for 18v-122.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 134176 [USA]: Deactivation of the vehicle stability control system can increase the risk of a crash in certain conditions.
  Toyota motor engineering & manufacturing (toyota) is recalling certain 2018 toyota tundra and sequoia vehicles. Electrical interference within the power supply circuit may cause the vehicle's electronic stability control system to be deactivated. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 126, "electronic stability control systems."
  toyota will notify owners, and dealers will update the vehicle's software, free of charge. The recall began march 14, 2018. Owners may contact toyota customer service at 1-888-270-9371. Toyota's number for this recall is j0h. Note: this recall has been superseded by 18v-685. The software remedy for 18v-685 includes the updates to the software for this recall.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 2021723 [Canada]: Accessories
  Issue: this recall is for certain block heater kits installed on certain vehicles or sold as accessories at toyota or lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: this recall only affects the following block heater/cord part numbers: C014003034 pk5a408j09 pU14000904 C014003151 pk5a408j13 pU14000905 C014000885 pk5a489j11 pU14000907 C014000888 pk5a489j22 pU14000909 C014000907 pk5a410h00 pU14000911 C014100904 pU14000900 pU14000913 C014100907 pU14000901 pU14003571 C014100911 pU14000902 pk5a408j05 pU14000903 safety risk: engine block heater wiring that overheats or melts could create the risk of a fire. Corrective actions: toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.

  Show Content

• Recall 2020514 [Canada]: Fuel supply
  Issue: on certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: this recall is an expansion of recalls src r95/src r96 and src ra2/src ra3 (transport canada recall numbers 2020-005 and 2020-088). Safety risk: a sudden loss of engine power could increase the risk of a crash. Corrective actions: the company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

  Show Content

• Recall 2020088 [Canada]: Fuel supply
  Issue: on certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: this recall is an expansion of recall src r95/src r96 (transport canada recall no. 2020-005) safety risk: a sudden loss of engine power could increase the risk of a crash. Corrective actions: the company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

  Show Content

• Recall 2020005 [Canada]: Fuel supply
  Issue: on certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Safety risk: a sudden loss of engine power could increase the risk of a crash. Corrective actions: the company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

  Show Content

• Recall 2018547 [Canada]: Airbag
  Certain vehicles may not comply with the requirements of canada motor vehicle safety standard (cmvss) 208 - occupant protection in frontal impacts and cmvss 214 - side impact protection. The airbag (srs) control unit may incorrectly detect a fault in one or more of the front or side airbag impact sensors during vehicle start up. In the event of a crash where airbag deployment is required, this may result in the airbags not deploying as designed, increasing the risk of injury. Upon detection of a fault in the airbag system, multiple warning lights would activate, a warning buzzer would sound, and a warning message would display on the instrument panel display. Correction: dealers will update the airbag control unit software. Note: this recall supersedes recall 2018-100. Vehicles repaired as part of the previous recall will require re-inspection and repair.

  Show Content

• Recall 2018100 [Canada]: Electrical
  Certain vehicles may fail to comply with the requirements of canada motor vehicle safety standard (cmvss) 126 - electronic stability control systems. Electrical noise could be introduced into the yaw rate sensor within the airbag ecu, which could result in deactivation of the vehicle stability control and pre-collision systems and limited function of the trailer brake controller system. This would be contrary to the requirements of the standard, and could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will update the software of the ecu. Note: this recall is superseded by recall 2018547. Please see recall 2018547 for more information.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The following is a list of any known keyfobs for the Toyota Sequoia 2018 as well as their FCC IDs if available

• RHK-TOY-0R100: 2013-2019 Toyota Rav4 Highlander Sequoia / 4-Button Remote Head Key / GQ4-52T (H-Chip) (OEM)
  FCC ID: GQ4-52T

In the past few months the automatic braking feature was activated without any reason. No obstruction in front, no unusual weather or driving conditions. Fortunately nobody was close behind and no accident occurred. Today the blind spot and cross traffic indicators stopped working. I have not taken it into the dealer yet. I will do so soon.

The contact owns a 2018 toyota sequoia. The contact stated while driving at 55 mph, the lane departure and rear cross passing warning light illuminated and the vehicle failed to turn off. The contact took the vehicle to the local dealer to inspect the vehicle however, the mechanic was unable to duplicate the failure. Several months later, the failure recurred. The contact took the vehicle back to the same local dealer to be inspected. The contact was informed that the rear bumper sensor was not properly aligned to the brackets on the bumper, causing the failure. The vehicle was repaired however, the contact was concerned that at some point the failure might recur. The manufacturer was made aware of the failure. The failure mileage was 45,000.

I took my 2018 toyota sequoia (vin: [xxx]) on september 23, 2020 for the six-month toyotacare service to american toyota located at 5995 alameda blvd ne, albuquerque, nm 87113 with the assumption that the six-month toyotacare service will include fixing any pending safety recall. However, after the service, when i checked the paperwork, i found out that the pending safety recall (manufacturer recall: 20ta02, nhtsa recall: 20v012) was not fixed and it was claimed that there were no safety recalls associated with the vehicle (see the attached paperwork). I called the service department at the american toyota and the service representative didn't give me a reasonable reason so i demanded to talk a manager. The manager didn't know why the safety recall was not fixed so he promised to do some investigations and get back to me. Later, a senior manager from the american toyota called me and gave me the following reasons for not fixing the safety recall: - i specifically didn't ask for safety recall to be fixed - american toyota didn't have a certified technician available at that time to fix the safety recall - american toyota made false statement on the service paperwork that there was no safety recall associated with the vehicle when i talked to the senior service manager at american toyota, he promised to get the database and paperwork updated soon but as of today (three weeks later) i have not received a corrected paperwork from the american toyota. I see this a systematic issue at american toyota to falsely mark the service paperwork as no pending safety issue if the customer didn't ask for fixing a safety issue and/or if a certified technician is not available. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

I took my 2018 toyota sequoia (vin: [xxx]) on september 23, 2020 for the six-month toyotacare service to american toyota located at 5995 alameda blvd ne, albuquerque, nm 87113 with the assumption that the six-month toyotacare service will include fixing any pending safety recall. However, after the service, when i checked the paperwork, i found out that the pending safety recall (manufacturer recall: 20ta02, nhtsa recall: 20v012) was not fixed and it was claimed that there were no safety recalls associated with the vehicle (see the attached paperwork). I called the service department at the american toyota and the service representative didn't give me a reasonable reason so i demanded to talk a manager. The manager didn't know why the safety recall was not fixed so he promised to do some investigations and get back to me. Later, a senior manager from the american toyota called me and gave me the following reasons for not fixing the safety recall: - i specifically didn't ask for safety recall to be fixed - american toyota didn't have a certified technician available at that time to fix the safety recall - american toyota made false statement on the service paperwork that there was no safety recall associated with the vehicle when i talked to the senior service manager at american toyota, he promised to get the database and paperwork updated soon but as of today (three weeks later) i have not received a corrected paperwork from the american toyota. I see this a systematic issue at american toyota to falsely mark the service paperwork as no pending safety issue if the customer didn't ask for fixing a safety issue and/or if a certified technician is not available. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

Audio multimedia (including handsfree driving devise and gps) without any reason and while they are in use rebooting and rebooting, and can cause distract the driver

Sunroof exploded while driving on freeway. I was doing 65 mph in the carpool lane. No apparent debris from surrounding vehicles. Front car was far away, side vehicles driving slower and no trucks. All the edges of the remaining glass are facing outward as if there was too much pressure inside the vehicle. I had complained earlier to the dealer about a wind whistling noise which they were unable to confirm. 10:15 am, 58 degrees, spotted rain, 5-16-2019

Pre collision system(pcs) is not working. The two problems are 1. The pcs off light comes on dash when the pcs is on as evidenced by the photos. 2. The pcs system does not apply the brakes in a near collision. Car was taken into toyota of greenville and we were told that this was a problem with other toyotas but they did not have a solution. Now we are stuck with a car with a faulty safety feature.

Rented vehicle from hertz in oklahoma city, ok on 10/14/18. When i returned vehicle on 10/18/18, the rental car associate wrote "safety" on the window. When i asked what the "safety" was for, he said, "... This vehicle is under recall and should have never been rented to you." nhtsa #18v685 - air bag may disabled due to faulty programming. Additionally, recall number 18v122000 recall date 02/20/2018 component electronic stability control may be relevant.

The seats from 2 and 3 row vibrates and makes noise,seat belts gets stuck and doesn't retrack back completely inside and get twisted every single time.Every single time i have to put the belt inside manually

Common OBD-II Error Codes

• C0140 [1] C0140
• C0141 [1] C0141
• U1400 [1] U1400
• P0087 [1] Fuel Rail/System Pressure - Too Low
• P0171 [1] System too Lean (Bank 1)
• P0174 [1] System too Lean (Bank 2)