T-SB-0059-18
Service Bulletin Details
Public Details for: T-SB-0059-18
Tsb: all 2016 ? 2018 model year land cruiser and 2018 model year sequoia, tacoma, and tundra vehicles are equipped with a pre-collision system (pcs), also known as automatic emergency braking (aeb) as part of toyota safety sense. The pre-co
Models from 2017
2017 TOYOTA LAND CRUISER |
Models from 2016
2016 TOYOTA LAND CRUISER |
T-SB-0059-18 Sep 11, 2018 Pre-Collision System (PCS) Customizable Features for Off-Road/Special Driving Conditions Service Category Brake Section Brake Control/Dynamic Control System Market USA Applicability YEAR(S) MODEL(S) 2016 - 2018 Land Cruiser 2018 Sequoia, Tacoma, Tundra ADDITIONAL INFORMATION Introduction All 2016 – 2018 model year Land Cruiser and 2018 model year Sequoia, Tacoma, and Tundra vehicles are equipped with a Pre-Collision System (PCS), also known as Automatic Emergency Braking (AEB) as part of Toyota Safety Sense. The Pre-Collision System (PCS) defaults its operating mode to ON after each ignition (IG) cycle. In some driving conditions, such as extended off-road use, driving with tire chains in adverse conditions, towing another vehicle, or when your vehicle is being towed, drivers should operate the vehicle with PCS OFF. Drivers may also prefer to maintain this setting after each IG cycle. If this functionality is requested, follow the procedure in this Service Bulletin to disable the PCS mode reset after each IG cycle. Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – – – – © 2018 Toyota Motor Sales, USA Page 1 of 5 T-SB-0059-18 Sep 11, 2018 Page 2 of 5 Pre-Collision System (PCS) Customizable Features for Off-Road/Special Driving Conditions Required Tools & Equipment REQUIRED EQUIPMENT SUPPLIER Techstream 2.0* Techstream Lite PART NUMBER QTY TS2UNIT ADE Techstream Lite (Green Cable) TSLITEPDLR01 TSLP2DLR01 * Essential SST. NOTE • Only ONE of the Techstream units listed above is required. • Software version 13.10.019 or later is required. • Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE) at 1-800-368-6787. Pre-Collision System Customization Procedure 1. Connect Techstream to the vehicle. Figure 1. © 2018 Toyota Motor Sales, USA 1 T-SB-0059-18 Sep 11, 2018 Page 3 of 5 Pre-Collision System (PCS) Customizable Features for Off-Road/Special Driving Conditions Pre-Collision System Customization Procedure (continued) 2. Select Customize Setting. Figure 2. © 2018 Toyota Motor Sales, USA T-SB-0059-18 Sep 11, 2018 Page 4 of 5 Pre-Collision System (PCS) Customizable Features for Off-Road/Special Driving Conditions Pre-Collision System Customization Procedure (continued) 3. Select Others. Figure 3. 4. Select ON for PCS Operation State Retention Setting. Figure 4. NOTE The default setting for PCS Operation State Retention is OFF. Selecting ON will maintain the last PCS setting at ignition OFF for the next time the ignition is cycled. © 2018 Toyota Motor Sales, USA T-SB-0059-18 Sep 11, 2018 Page 5 of 5 Pre-Collision System (PCS) Customizable Features for Off-Road/Special Driving Conditions Pre-Collision System Customization Procedure (continued) 5. Once ON is selected, click the green arrow at the bottom of the page to continue. Figure 5. 6. Click Next to begin the initialization procedure. Figure 6. 7. Once the Customize Setting is updated, the PCS Operation State Retention Setting will be set to maintain the last setting at ignition OFF for the next time the ignition is cycled. Figure 7. 8. Confirm the PCS setting is retained AFTER the ignition cycle. © 2018 Toyota Motor Sales, USA