PI0865A
Service Bulletin Details
Public Details for: PI0865A
This preliminary informational bulletin provides information on components that must be transferred over from the original engine for the ecotec 2.4l.
Models from 2011
2011 BUICK REGAL |
2011 CHEVROLET EQUINOX |
2011 GMC TERRAIN |
Models from 2010
2010 CHEVROLET EQUINOX |
2010 GMC TERRAIN |
Bulletin No.: PI0865A Date: Jan-2013 Subject: Information on 2.4L Ecotec Service Engine Models: 2011-2013 Buick Regal 2012-2013 Buick Verano 2010-2013 Chevrolet Equinox 2012-2013 Chevrolet Orlando (Canada) 2010-2013 GMC Terrain Equipped with Engine RPOs LAF or LEA This PI is being revised to provide additional 2010 information, part information and warranty information. Please discard PI0865. The Ecotec 2.4L service engine will not have the intake manifold, high pressure fuel system or the ignition coils installed. These components must be transferred from the original engine. A new high pressure fuel feed pipe from the pump to the fuel rail must also be used. Do not reuse the original pipe as a fuel leak may develop. For the 2010 model year engine, new part number 12657110, already has the correct intake camshaft and actuator in the engine. There is no need to transfer these parts when using this part number. Important: The new 2.4L Ecotec Service engines DO NOT come shipped with oil. Important: For 2010-2011 models built before March 2011, check GWM to determine if the high pressure fuel pump was ever replaced. If it was not, replace with a new high pressure fuel pump. Parts that need to be transferred from original engine to the new service engine: • Intake Manifold • Fuel Injectors • High Pressure Fuel Pump • Fuel Feed Pipe • Ignition Coils Parts Information Part Number Description 12655766 (2011-2013 MY) Ecotec Engine 12657110 (2010 MY Only) 12631646 Fuel Injector Seal Kit 12595951 High Pressure Fuel Pump Gasket 1 12628003 Intake Manifold Gasket 12622668 Exhaust Manifold Gasket 12608374 Fuel Feed Pipe Warranty Information For vehicles repaired under warranty, use: Labor Operation Description Labor Time J1840 Engine Replacement Use Published Labor Operation Time Add To Transfer parts 1.0 hr GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information. WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION 2