TIN-18-52A-001
Service Bulletin Details
Public Details for: TIN-18-52A-001
This is a technical information notice sent to dealers. It addresses the slight intermittent movement in the vehicle's driver side power seat. The notice refers dealers to tsb-17-52a-003 if vehicle was built before production dates 03/01/20
Models from 2018
| 2018 MITSUBISHI OUTLANDER |
Models from 2017
| 2017 MITSUBISHI OUTLANDER |
Models from 2016
| 2016 MITSUBISHI OUTLANDER |
* * TECHNICAL INFORMATION NOTICE * * DATE: March 9, 2018 TO: Mitsubishi Motors US & Puerto Rico Dealer Service and Parts Managers RE: Driver’s Power Seat Adjuster Assembly TIN NO. TIN-18-52A-001 AFFECTED VEHICLES: 2016 and newer Outlander produced after 3/1/2016 (2.4L) and 3/3/2016 (3.0L) PURPOSE On May 2, 2017, TSB-17-52A-003 (Slight Intermittent Movement in Driver’s Power Seat) was published to address customer concerns of a slight movement of the driver’s power seat. The TSB instructed dealers to replace affected seat adjuster assemblies with an improved countermeasure part, part number 6922A119 (see illustration). This concern affected Outlander vehicles built before production dates of 3/1/2016 (2.4L) and 3/3/2016 (3.0L). For vehicles built AFTER these production dates, it is not recommended to replace the driver’s seat adjuster since those vehicles already have the countermeasure parts in place. However, on a case-by-case basis, contact your DPSM to review the situation further. A DPSM PWA is required for replacement of the driver seat adjuster on affected vehicles. (4660)