EC1801

Volvo Trucks North
America
Greensboro, NC USA
Service Program
Trucks
Date
3.2018
Group
No.
381 047
Release
Page
01
1(3)
Instrument Cluster, Reprogramming
VN, VHD, VAH, VT
EC 1801, Instrument Cluster, Reprogramming
(MID 140)
(March 2018)
On Certain Volvo Trucks with the Volvo engine the cluster may not fault the ambient
temperature sensor for electrical failures, this may cause engine to default to a fixed ambient
temperature value. This is due to a software issue in the instrument cluster. To correct this
issue follow the procedure below:
USA139764951
PV729-EC1801_V
English
Volvo Trucks North America
Service Program
Date
3.2018
Group
No.
Release
381
047
01
Decommissioning the Truck for Repair
You must read and understand the precautions and guidelines in Service Information,
group 30, "General Safety Practices, Electrical" before performing this procedure. If you
are not properly trained and certified in this procedure, ask your supervisor for training
before you perform it.
NOTE: Information is subject to change without notice. Illustrations are used for reference
only and can differ slightly from the actual vehicle being serviced. However, key
components addressed in this information are represented as accurately as possible.
1 Park the vehicle on a flat and level surface.
2 Apply the parking brake.
3 Place the transmission in neutral or park.
4 Install the wheel chocks.
W7086748
Instrument Cluster, Reprogramming Procedure
1 Connect Premium Tech Tool to the vehicle.
2 Reprogram the instrument cluster (MID 140).
Page
2(3)
Volvo Trucks North America
Service Program
Date
3.2018
Group
No.
Release
381
047
01
Commissioning the Truck for Operation
1 Remove the wheel chocks.
W7086759
Reimbursement
This repair is covered by an authorized Service Program.
Reimbursement is obtained via the normal claim handling
process.
UCHP
Reimbursement
Claim Type (used only when uploading from the Dealer
Bus. Sys.)
B
Recall Status
Vehicle inspected, repair not required
Vehicle repaired per instruction
Labor Code
Primary Labor Code (Instrument Cluster, Reprogramming)
3811-22-02-01
0.3 hrs
Take to take charge and determine campaign status
1700–16–01–01
0.3 hrs
Causal Part
3092072
SCC Code
M0003
Authorization Number
NA
Expiration Date
NA
Note: Take Charge Time is not included in the Labor Code for this operation. Take charge
may be eligible but can only be used once per repair visit. If vehicle is having other warranty
repairs performed, take charge should be charged to the warranty repair, otherwise take
charge can be charged to this service program.
Page
3(3)