A011746 2038045

Service Bulletin Details

Public Details for: A011746 2038045

This technical service bulletin provides instructions for replacing the coolant thermostat with a new part number to resolve a stored dtc.


- 2015 - 2014 - 2013 -

01 MIL on (DTC P2181, P0597, or P0599 Cooling system performance)
01 17 46 2038045/5 November 21, 2017. Supersedes Technical Service Bulletin Group 01 number 17-18 dated
June 7, 2017 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
S6, S7, RS
7, S8, and
A8
2013 - 2015
All
4.0 TFSI
Condition
REVISION HISTORY
Revision
Date
Purpose
5
-
Revised Required Parts and Tools (Updated quantity)
4
06/07/2017
Revised Warranty (Updated Labor Operations and Claim Types)
3
06/24/2016
Revised header data (Added model years; added DTCs)
Revised Condition (Added DTCs)
Revised Service (Completely revised)
Revised Warranty (Updated Labor Operations)
Customer Statement:
 MIL on.
Workshop Findings:
One or more of the following DTC(s) is stored in the engine control module (ECM), J623 (address word 0001):
 DTC P218100 (Cooling System Performance)
 DTC P059700 (Thermostat heater control circuit open)
 DTC P059900 (Thermostat heater control circuit high)
Page 1 of 4
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Background
DTC P218100 will be stored if, after a specified air flow (warm-up phase), the measured engine temperature does
not reach the value in the timing map. Particles in the cooling system from the production process affect the
closing of the coolant thermostat.
Note:
Replacing the coolant temperature sender does not fix the problem.
Production Solution
Optimized coolant thermostat.
Service
1. Replace the coolant thermostat F265 with part number 079121115BD.
2. Fill the new coolant additive in the cooling system according to manufacturer guidelines. Observe the mixture
ratio and filling-up procedure.
Note:
Only mix distilled water with coolant additives. Distilled water provides optimum corrosion protection.
Note:
The filling procedure outlined in Elsa must be followed. It is important that the vacuum-down, filling, and bleeding
processes for the specific vehicle being repaired are used.
Page 2 of 4
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Warranty
Claim Type:
 110 up to 48 Months/50,000 Miles.
 G10 for CPO Covered Vehicles – Verify Owner.
 If vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
1958
Damage Code:
0016
Labor Operations:
Thermostat remove + reinstall (S6 and S7)
1958 1921
200 TU
Thermostat remove + reinstall (A8 and S8)
1958 1921
220 TU
Thermostat remove + reinstall (RS 7)
1958 1923
240 TU
GFF – Checking and clearing fault codes included in
existing labor operations
0150 0000
10 TU
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
0121 0004
10 TU
Diagnostic Time:
Claim Comment:
As per TSB # 2038045/5
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Part Number
Part Description
Quantity
079121115BD
Map controlled engine cooling thermostat F265
1
G 013A8J1G
Coolant additive
1
Outside material
Distilled water (obtain locally)
Shop supply
Page 3 of 4
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Tool Number
Tool Description
VAS 6096
Cooling System Charge Unit
VAG 1974/8
Adapter
VAG 1978/10
Adapter
VAS 6208
Drip tray
T10007A
Refractometer
Additional Information
All parts and service references provided in this TSB (2038045) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
©2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites without the prior expressed written permission of the publisher.
Page 4 of 4
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.