T-SB-0022-12 Rev
Service Bulletin Details
Public Details for: T-SB-0022-12 Rev
During the manufacturing process tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain
- 2013 -
Models from 2013
T-SB-0022-12 Rev1 January 24, 2012 Tire Positioning Before New Vehicle Delivery Service Category General Section Pre-Delivery Service Market USA Applicability YEAR(S) MODEL(S) 2013 4Runner, Avalon, Avalon HV, Camry, Camry HV, Corolla, FJ Cruiser, Highlander, Highlander HV, Land Cruiser, Matrix, Prius, Prius C, Prius PHV, Prius V, RAV4, Sequoia, Sienna, Tacoma, Tundra, Venza, Yaris ADDITIONAL INFORMATION REVISION NOTICE October 16, 2012 Rev1: • Applicability has been updated to include 2013 model year Avalon HV, Prius C, and Prius PHV vehicles. Any previous printed versions of this bulletin should be discarded. Introduction During the manufacturing process tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Please refer to the following procedure to ensure that the original tires stay in the same location on the vehicle. Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – – – – © 2012 Toyota Motor Sales, USA Page 1 of 2 T-SB-0022-12 Rev1 January 24, 2012 Page 2 of 2 Tire Positioning Before New Vehicle Delivery Installation Procedure 1. Mark the tire installation position on the inward facing tire sidewall. Example: Front Right = FR, Front Left = FL, Rear Right = RR, Rear Left = RL 2. Install the original tires on the new or refinished wheels with the marked side facing inwards. 3. Balance tire/wheel assemblies on the vehicle in the marked positions. 4. Place the tire/wheel assemblies on the vehicle in the marked positions. NOTE Torque the wheel nuts to the proper torque value in sequence. © 2012 Toyota Motor Sales, USA