JTB00515NAS2

3/2/2018
JTB00515NAS2 - Engine MIL Illuminated With DTC P025C-11 Stored | TOPIx
JTB00515NAS2
TECHNICAL BULLETIN
02 MAR 2018
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with
the knowledge, tools, and equipment required to do the job properly and safely. It informs these
Technicians of conditions that may occur on some vehicles, or provides information that could assist in
proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a
Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar
service facility to determine whether this bulletin applies to a specific vehicle.
INFORMATION
This reissue replaces all previous versions. Please destroy all previous versions.
Changes are highlighted in blue
SECTION:
303-14: Electronic Engine Controls
SUBJECT/CONCERN:
Engine MIL Illuminated With DTC P025C-11 Stored
AFFECTED VEHICLE RANGE:
MODEL:
F-PACE (X761)
MODEL YEAR:
2017
VIN:
045000-087775
https://topix.jaguar.jlrext.com/topix/content/document/view?id=885918
ASSEMBLY PLANT:
Solihull
APPLICABILITY:
V6 S/C 3.0L Petrol
1/5
3/2/2018
MODEL:
JTB00515NAS2 - Engine MIL Illuminated With DTC P025C-11 Stored | TOPIx
MODEL YEAR:
VIN:
ASSEMBLY PLANT:
APPLICABILITY:
XE (X760)
2017
923882-968200
Solihull
V6 S/C 3.0L Petrol
XF (X260)
2016
Y00001-Y43450
Castle Bromwich
V6 S/C 3.0L Petrol
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
The engine Malfunction Indicator Lamp (MIL) may be illuminated with Diagnostic Trouble Code (DTC)
P025C-11 stored in the Powertrain Control Module (PCM).
CAUSE:
This may be caused by a PCM software issue leading to the false setting of DTC P025C-11.
ACTION:
Should a Customer express this concern, follow the Diagnostic Procedure below.
PARTS:
No Parts Required
TOOLS:
https://topix.jaguar.jlrext.com/topix/content/document/view?id=885918
2/5
3/2/2018
JTB00515NAS2 - Engine MIL Illuminated With DTC P025C-11 Stored | TOPIx


Jaguar Land Roverapproved
Midtronics battery
power supply
Jaguar Land Roverapproved
diagnostic tool with
the latest SDD
Software
Management Pack
WARRANTY:
NOTES:
Repair procedures are under constant review, and therefore times are subject to change; those
quoted here must be taken as guidance only. Always refer to JLR claims submission system to
obtain the latest repair time.
The JLR Claims Submission System requires the use of causal part numbers. Labor only claims
must show the causal part number with a quantity of zero.
DESCRIPTION
Configure existing Powertrain Control Module
(PCM)
SRO
86.98.60
TIME
(HOURS)
0.2
CONDITION
CODE
04
CAUSAL
PART
C2D54092
NOTE:
Normal Warranty procedures apply.
DIAGNOSTIC PROCEDURE: SDD
This Diagnostic Procedure is only for vehicles requiring the Jaguar Land Rover-approved
diagnostic tool with Symptom Driven Diagnostics (SDD).
CAUTIONS:
https://topix.jaguar.jlrext.com/topix/content/document/view?id=885918
3/5
3/2/2018
JTB00515NAS2 - Engine MIL Illuminated With DTC P025C-11 Stored | TOPIx
A Jaguar Land Rover-approved Midtronics battery power supply must be connected to the
vehicle startup battery during diagnosis / module programming.
All ignition ON/OFF requests must be carried out. Failure to perform these steps may cause
damage to control modules in the vehicle.
NOTE:
Use DDW to check for Field Service Action program eligibility requiring a Powertrain Control
Module (PCM) software update. If eligible, perform and claim the update as per that program.
1
Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle startup
battery.
2
NOTE:
The Jaguar Land Rover-approved diagnostic tool must be loaded with SDD152.04
Software Management Pack v289 (or later).
Connect the Jaguar Land Rover-approved diagnostic tool to the vehicle and begin a new session.
3
Follow all on-screen instructions, allowing the diagnostic tool to read the VIN, identify the vehicle,
and initiating the data collect sequence.
4
If the hyperlink is not available:
1 Select Diagnosis from the Session Type screen.
2 Select the Selected Symptoms tab.
3 Select Electrical - Instruments - Warning lamps - Engine malfunction lamp - Lamp
illuminated
4 Select continue.
5 Select the Recommendations tab.
6 Select Run to perform the 'Configure existing module - Powertrain control module'
option.
5
Follow all on-screen instructions until the application completes successfully.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=885918
4/5
3/2/2018
JTB00515NAS2 - Engine MIL Illuminated With DTC P025C-11 Stored | TOPIx
1 When prompted, select the Clear DTCs option following completion of the software
download.
2 When all tasks are complete, go to the next Step.
6
Exit the current session.
1 Select the Session tab.
2 Select the Close Session option.
7
Disconnect the diagnostic tool and battery power supply from the vehicle.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=885918
5/5