BTS180401
Service Bulletin Details
Public Details for: BTS180401
Tech line summary article - can?T get past this screen when adding keys with the immobilizer setup tool in the i-hds? "tester is not communicating with immobilizer unit". Here?S an easy workaround to restore communication. 1. Release the b
- 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 -
Models from 2012
| 2012 ACURA RL |
Models from 2011
| 2011 ACURA RL |
Models from 2010
| 2010 ACURA RL |
Models from 2009
| 2009 ACURA RL |
Models from 2008
| 2008 ACURA RL |
Models from 2007
| 2007 ACURA RL |
Models from 2006
| 2006 ACURA RL |
Models from 2005
| 2005 ACURA RL |
Tech Line Summary Article April 2018 BTS 180401 Version 1 No Communication with the Immobilizer Control Unit-Receiver? AFFECTED VEHICLES 2005−12 RL Can’t get past this screen when adding keys with the Immobilizer Setup Tool in the i-HDS? Here’s an easy workaround to restore communication. 1. Release the built-in key from the keyless access remote. 2. Remove the ignition switch cover. To do this, just insert the key into the slot in the bottom of the cover, push the key all the way in, then pull out on the cover and the key. 3. Insert the key into the ignition switch, then turn it to ON. 4. Select OK on the i-HDS screen to continue. 5. If there’s still no communication, call the Special Tools Hotline at 800-346-6327 for support. You’ll also find this covered in SIS. Select General Publications > Tool Information > Diagnostic and Reprogramming > i-HDS Known Issues List > No Communication with Immobilizer Unit on 2005−2012 Acura RL. © 2018 American Honda Motor Co., Inc. – All Rights Reserved Page 1 of 1