LI83.00-N-059058
Service Bulletin Details
Public Details for: LI83.00-N-059058
Insufficient heat output or cooling output at front of the vehicle
Models from 9999
9999 MERCEDES-BENZ SPRINTER 906 |
Models from 2011
2011 MERCEDES-BENZ SPRINTER 906 |
Models from 2010
2010 MERCEDES-BENZ SPRINTER 906 |
Insufficient heat output or cooling output at frond of the vehicle Topic number LI83.00-N-059058 Version 1 Design group 83.00 General Date 05-19-2014 Validity MODEL 906.1## as of N563913 with CODE XM0 (Facelift), without CODE IF4 (Chassis with crewcab) MODEL 906.6## as of S817695 with CODE XM0 (Facelift), with CODE D50 (Full-width partition wall) MODEL 906.6## as of S817695 with CODE XM0 (Facelift), with CODE D51 (Full-width partition wall with 1 window) MODEL 906.6## as of S817695 with CODE XM0 (Facelift), with CODE D52 (Full-width partition wall with 1 sliding window) MODEL 906.6## as of S817695 with CODE XM0 (Facelift), with CODE D64 (Partition wall with sliding door) Reason for change Country distribution expanded Reason for block Complaint: Insufficient heat output or cooling output at frond of the vehicle. Cause: The hood (1) of the air ducting (2) can become loose. This allows the warm or cold air to escape behind the instrument panel (see Figure 01). Remedy: Glue in the hoods (1) of the air ducting (2) with two-component adhesive (3) (see Figure 01). Note: • Remove trim (6). To do this, use a long wedge (115 589 03 59 00) to carefully unclip the trim (6) starting at the top (see Figure 02). • Remove bezel (7) of air vent in center section of instrument panel (see AR68.10-D-1585A) (see Figure 02). • Unclip stowage compartment (4) from center section of instrument panel (see Figure 02). • Remove stowage compartment (5) from center section of instrument panel (two version, with/without CODE FJ1 (Flip cover with stowage compartment)) (see Figure 02). • Glue in hoods (1) using two-component adhesive (3) order no. A000 989 99 71 (see Figure 01). Attachments File Description 01.jpg Instrument panel center section 02.jpg Instrument panel center section 05-19-2014 7:14 PM © Copyright Daimler AG RGHAZIZ Page 1/3 Symptoms Body / Air conditioning / Heater / Insufficient heat output Body / Air conditioning / Air conditioning / Insufficient cooling output Parts Part number ES1 ES2 Designation A 006 989 99 71 Quantity Note Adhesive 1 EPC Other make part Can be used for several vehicles. X Validity Vehicle Engine Transmission 906.111 * * 906.113 * * 906.131 * * 906.132 * * 906.133 * * 906.134 * * 906.135 * * 906.136 * * 906.153 * * 906.155 * * 906.611 * * 906.613 * * 906.631 * * 906.633 * * 906.635 * * 906.637 * * 906.653 * * 906.655 * * 906.657 * * Attachments 05-19-2014 7:14 PM © Copyright Daimler AG RGHAZIZ Page 2/3 01.jpg: 02.jpg: 05-19-2014 7:14 PM © Copyright Daimler AG RGHAZIZ Page 3/3