07-001-14

Service Bulletin Details

Public Details for: 07-001-14

Intermittent engine cooling fan operation this bulletin involves an inspection of the engine cooling fan module and replacement if necessary. The customer may experience an engine overheat condition or lack of cooling from the air conditi


- 2014 -

Models from 2014
2014 JEEP WRANGLER
NUMBER:
GROUP:
DATE:
07-001-14
Cooling
February 15, 2014
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of Chrysler Group LLC.
THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE
TRANSMITTAL (RRT) 14-013. ALL APPLICABLE SOLD AND UN-SOLD RRT VIN's
HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS
APPLICABLE TO THE VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN
TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF
WARRANTY.
SUBJECT:
Intermittent Engine Cooling Fan Operation
OVERVIEW:
This bulletin involves an inspection of the Engine Cooling Fan Module and replacement if
necessary.
MODELS:
2014
(JK)
Wrangler
NOTE: This bulletin applies to vehicles built on or after August 8, 2013 (MDH
0808XX) and on or before August 18, 2013 (MDH 0818XX).
SYMPTOM/CONDITION:
The customer may experience an engine overheat condition or lack of cooling from the air
conditioning system.
DIAGNOSIS:
If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. For all other
customers that describe the symptom/condition, perform the Repair Procedure.
PARTS REQUIRED:
Qty.
Part No.
Description
1
68143894AB
Module, Engine Cooling
REPAIR PROCEDURE:
1. Inspect the barcode label affixed to the rear of the engine cooling fan motor.
2. Does the label indicate “Made in USA” (Fig. 1)?
a. Yes>>> Proceed to Step 3.
b. No>>> Repair complete.
07-001-14
-2-
Fig. 1 Barcode Label
1 - Manufacturing Location
3. Replace the Engine Cooling Fan Module Assembly. Refer to the detailed removal and
installation procedures available in DealerConnect> TechConnect> Service Info>
Cooling> Engine> Fan, Cooling> Removal/Installation.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation
No:
Description
Skill Category
Amount
07-15-01-90
Cooling Fan, Inspect Only
(1 - Semi-Skilled)
7 - Cooling
0.2 Hrs.
07-15-01-91
Cooling Fan, Inspect and Replace
(1 - Semi-Skilled)
7 - Cooling
0.3 Hrs.
FAILURE CODE:
ZZ
Service Action


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.