SSM 47020

Service Bulletin Details

Public Details for: SSM 47020

Some 2015-2018 transit vehicles equipped with a 3.2l duratorq-tdci may exhibit an engine oil leak from the rear crankshaft seal. The workshop manual (wsm), section 303-01 has been updated to include the correct location to apply sealant to


- 2018 - 2017 - 2016 - 2015 -

Models from 2018
2018 FORD TRANSIT
Models from 2017
2017 FORD TRANSIT
Models from 2016
2016 FORD TRANSIT
Models from 2015
2015 FORD TRANSIT 
SSM
47020
Some 2015-2018 Transit vehicles equipped with a 3.2L Duratorq-TDCi may exhibit an engine oil leak
from the rear crankshaft seal. The Workshop Manual (WSM), Section 303-01 has been updated to
include the correct location to apply sealant to the rear crankshaft seal. When repairing a rear
crankshaft oil leak condition, a 3 mm (0.120 in) bead of Motorcraftù Silicone Gasket and Sealant TA30 (WSE-M4G323-A4) or equivalent must be applied to the joints where the ladder frame meets the
engine block. Failure to follow the updated procedure in WSM, Section 303-01 may result in a repeat
oil leak at the rear of the engine.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.