JTB00635NAS1

5/14/2018
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx
JTB00635NAS1
TECHNICAL BULLETIN
11 MAY 2018
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with
the knowledge, tools, and equipment required to do the job properly and safely. It informs these
Technicians of conditions that may occur on some vehicles, or provides information that could assist in
proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a
Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar
service facility to determine whether this bulletin applies to a specific vehicle.
INFORMATION
SECTION:
501-05: Interior Trim and Ornamentatio
SUBJECT/CONCERN:
Luggage Compartment Header Panel Trim
AFFECTED VEHICLE RANGE:
MODEL:
MODEL YEAR:
VIN:
ASSEMBLY PLANT:
XE (X760)
2017
921222-999999
Solihull
XE (X760)
2017 Onwards
P10168 Onwards
Castle Bromwich
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
1/10
5/14/2018
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
A piece of trim may appear to be missing from the luggage compartment or the luggage compartment
appears unfinished.
CAUSE:
This may be caused by the luggage compartment header panel trim not being originally considered a
requirement.
ACTION:
Should a customer express this concern, follow the Workshop Procedure below.
PARTS:
NOTE:
* - an allowance of $5.20 USD or local equivalent has been provided to cover the cost of the
double-sided self-adhesive foam. Claim using Sundry Code ‘ZZZ001’.
PART NUMBER
DESCRIPTION
QUANTITY
T4N21674
Luggage compartment header trim
1
ZZZ001
Doubled-sided self-adhesive foam
$5.20 USD or local
equivalent
TOOLS:
Refer to Workshop Manual for any required special tools.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
2/10
5/14/2018
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx
WARRANTY:
NOTE:
* - an allowance of $5.20 USD or local equivalent has been provided to cover the cost of the
double-sided self-adhesive foam. Claim using Sundry Code ‘ZZZ001’.
NOTES:
Repair procedures are under constant review, and therefore times are subject to change; those
quoted here must be taken as guidance only. Always refer to JLR claims submission system to
obtain the latest repair time.
The JLR Claims Submission System requires the use of causal part numbers. Labor only claims
must show the causal part number with a quantity of zero.
DESCRIPTION
Luggage Compartment Header Panel Trim Installation
TIME
(HOURS)
SRO
76.96.72
0.1
CONDITION
CODE
39
CAUSAL
PART
T4N15656
NOTE:
Normal Warranty procedures apply.
NOTES:
This procedure contains some variation in the illustrations depending on the vehicle
specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra
clarity.
1
Open the luggage compartment lid.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
3/10
5/14/2018
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx
2
NOTE:
Repeat for both sides of the vehicle.

Remove the 2 luggage compartment trim panel retaining clip.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
4/10
5/14/2018
3
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx

Use a suitable tool to cut the retaining clips from the luggage compartment header panel trim.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
5/10
5/14/2018
4
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx

Measure and cut a suitable piece of double-sided self-adhesive foam to the dimensions shown.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
6/10
5/14/2018
5
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx

Install the double-sided self-adhesive foam to the luggage compartment header panel trim.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
7/10
5/14/2018
6
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx

Install the luggage compartment header panel trim.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
8/10
5/14/2018
7
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx

Apply firm pressure to the center of the luggage compartment header panel trim to make sure
the self-adhesive foam has bonded.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
9/10
5/14/2018
8
JTB00635NAS1 - Luggage Compartment Header Panel Trim | TOPIx

Install the luggage compartment seal over the luggage compartment header panel trim.
9
Close the luggage compartment lid.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=895021
10/10