SSM 47354

Service Bulletin Details

Public Details for: SSM 47354

Some 2017-2018 f-super duty pickups may exhibit an instrument panel cluster (ipc) turn signal indicator that flashes fast with no inoperative turn signal lamps after the pickup box has been removed by the upfitter. This may be due to the bo


- 2018 - 2017 -

Models from 2018
2018 FORD F-250 SD
2018 FORD F-350 SD
2018 FORD F-650 SD
2018 FORD F-750 SD
Models from 2017
2017 FORD F-250 SD
2017 FORD F-350 SD
2017 FORD F-450 SD
2017 FORD F-550 SD
2017 FORD F-650 SD
2017 FORD F-750 SD 
SSM
47354
Some 2017-2018 F-Super Duty pickups may exhibit an instrument panel cluster (IPC) turn signal
indicator that flashes fast with no inoperative turn signal lamps after the pickup box has been
removed by the upfitter. This may be due to the body control module (BCM) not recognizing the
modified lower current turn signal lighting that was installed. To correct this concern, use Integrated
Diagnostic System (IDS) service tool version 104.04 or later to configure turn lamp outage settings
as required. Under toolbox > module programming > programmable parameters > exterior lighting,
select rear bulb turn outage and outage ABM and change the setting on each parameter from outage
to no outage. Changes to lamp outage settings on pickups as a result of upfitter modifications are
non-warrantable. Upfitters are responsible for FMVSS 108 compliance.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.