K84441429

Service Bulletin Details

Public Details for: K84441429

Volvo chassis - charging lamp ( battery light, alternator light ) illuminated (on) in the instrument cluster after the cluster is replaced - us04 emissions, model years 2005 to 2007


- 2007 - 2006 - 2005 -

Solution K84441429
Wednesday, August 29, 2018 7:12:23 PM CEST
Volvo Models
Volvo Model
VNL , VNM , VHD , VAH
Engine family
Engine family
Cummins , Volvo , D12 , 16L Engine
Emission Standard
Emission Standard
US04
** SOLUTION **
Title
Volvo Chassis - Charging Lamp ( Battery Light, Alternator Light ) Illuminated (ON) In
The Instrument Cluster After The Cluster Is Replaced - US04 Emissions, Model Years
2005 to 2007
Cause
The low battery warning / charging light remains on after a replacement cluster has been
installed in a Volvo US04 chassis.
Solution
On a Volvo US04 Chassis that has had a replacement cluster just installed and the low
battery warning is being displayed, advise to confirm if there is a diode in the circuit
wire number " 14 " . This will be indicated by a bulge in the harness approximately 1
foot from the back of the cluster.from connector port " C " pin " 7 " wire number " 14 ".
This diode must be removed before the light will go off. Note: Some chassis have been
found to have the diode installed in circuit wire number " 14 " at the alternator end of
the circuit especially on VHD models.
Solution visibility
Dealer distribution
Function(s)/component(s) affected
Function affected
dashboard/information display , MID 140 – IC04 / IC05
Function Group
Function Group
31 battery; energy storage system; mounting parts , 32 alternator and charge regulator
, 381 combined instrument
Customer effect
Main customer effect
diagnostics/methodology , fault code/display
Lights/Messages on
message on display , ALTERNATOR , ALTERNATOR No longer charging Risk of
information display
immobilization , GO TO WORKSHOP BATTERY VOLTAGE FAULT
Conditions
Vehicle operating mode
Warning light/lamps
/pictograms
Other conditions
Administration
when driving , when stationary
red
after a workshop procedure on the vehicle
Author
ut01793
Last modified by
RU4469V
Creation date
17-03-2016 18:03
Date of last update
14-08-2018 22:08
Status
Published


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.