5NP-D2B2H-09

Service Bulletin Details

Public Details for: 5NP-D2B2H-09

Hyundai is conducting a product improvement campaign to enhance the knock sensor software on certain 2015 my sonata vehicles to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing


- 2015 -

Models from 2015
2015 HYUNDAI SONATA 
GROUP
CAMPAIGN
c
Technical Service Bulletin
SUBJECT:
DATE
AUGUST 2018
NUMBER
18-01-027
MODEL(S)
SONATA (LF)
SONATA ECM & CLUSTER UPDATE – ENGINE MONITORING
LOGIC PRODUCT IMPROVEMENT (SERVICE CAMPAIGN 953)
 IMPORTANT
*** Retail Vehicles ***
Dealers must perform this Campaign on all affected vehicles whenever an affected vehicle is in the
shop for any maintenance or repair.
When a vehicle arrives at the Service Department, access Hyundai Motor America's "Warranty
Vehicle Information" screen via WEBDCS to identify open Campaigns.
Description: Hyundai is conducting a product improvement campaign to enhance the knock sensor
software on certain 2015 MY Sonata vehicles to detect abnormal engine bearing noise before
potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the
Malfunction Indicator Lamp (MIL) will blink continuously, a chime will sound, and the vehicle will be
placed in Limp Home Mode allowing the customer to drive to the nearest Hyundai dealer for
diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can
continue to be operated for a limited time in Limp Home Mode, but it will accelerate slower and have
a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Applicable Vehicles: Certain 2015 MY Sonata (LF) vehicles with 2.4L and 2.0L Turbo engines
NOTICE


Ensure BOTH the Engine ECM and Cluster are updated to complete this TSB.
Reference the ROM ID Information tables below before attempting any updates.
GDS Information:
ROM ID Information Table
Engine ECM - Upgrade Event #480
Engine
2.4L
(ULEV)
Immobilizer
Yes
Part Number
OLD ROM ID
NEW ROM ID
39111-2GGK5
LFAFNC4ER86A
LFAFNC4ER86B
LFAFNC4ER86C
LFAFNC4ER87A
LFAFNC4ER87B
LFAFNC4ER88A
LFAFNC4ERA51
LFAFNC4ERA53
LFAFNC4ERC0A
LFAFNC4ERC0K
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
2.4L
(ULEV)
SONATA ECM & CLUSTER UPDATE / PRODUCT IMPROVEMENT (SERVICE CAMPAIGN 953)
No
39111-2GGK0
Yes
39111-2GGL5
No
39111-2GGL0
Yes
39111-2GTE5
LFAFNC4EM86A
LFAFNC4EM86B
LFAFNC4EM86C
LFAFNC4EM87A
LFAFNC4EM87B
LFAFNC4EM88A
LFAFNC4EMA51
LFAFNC4EMA53
LFAFNC4EMC0A
LFAFNS4ER86A
LFAFNS4ER86B
LFAFNS4ER86C
LFAFNS4ER87A
LFAFNS4ER87B
LFAFNS4ER88A
LFAFNS4ERA51
LFAFNS4ERA53
LFAFNS4ERC0A
LFAFNS4EM86A
LFAFNS4EM86B
LFAFNS4EM86C
LFAFNS4EM87A
LFAFNS4EM87B
LFAFNS4EM88A
LFAFNS4EMA51
LFAFNS4EMA53
LFAFNS4EMC0A
LFAFNC0ER87A
LFAFNC0ER87B
LFAFNC0ER88A
2.4L
(SULEV)
2.0T
(ULEV)
LFAFNC4EMC0K
LFAFNS4ERC0K
LFAFNS4EMC0K
LFAFNC0ER88K
GDS Information:
ROM ID Information Table
Cluster – Upgrade Event #481/482
Event / Cluster Type
EVENT #481
STANDARD CLUSTER
(BASE - 2.4L)
EVENT #481
STANDARD CLUSTER
(SPORTS PACK - 2.0T)
EVENT #482
SUPER VISION CLUSTER
(BASE - 2.4L)
EVENT #482
SUPER VISION CLUSTER
(SPORTS PACK - 2.0T)
Part Number
OLD ROM ID
NEW ROM ID
94001-C2000_A03
94001-C2000_103
94001-C2000_110
94001-C2000_104
94021-C2000_A02
94021-C2000_103
94021-C2000_100
94021-C2000_104
94011-C2000
94011-C2000_101
94011-C2000_102
94011-C2000_103
94031-C2000
94031-C2000_100
94031-C2000_101
94031-C2000_103
94001-C2000
94021-C2000
TSB #: 18-01-027
Page 2 of 7
SUBJECT:
SUBJECT:
SONATA ECM & CLUSTER UPDATE / PRODUCT IMPROVEMENT (SERVICE CAMPAIGN 953)
Warranty Information:
Model
Op. Code
Operation
Op. Time
Causal Part
No.
Nature
Code
Cause
Code
SONATA
(LF)
80CA08R0
ECM & CLUSTER UPDATE
0.5 M/H
39111-2GGK5
E13
ZZ3
NOTE 1: Submit Claim on Campaign Claim Entry Screen
NOTE 2: If a part is found in need of replacement while performing this campaign and the affected part is still
under warranty, submit a separate claim using the same Repair Order. If the affected part(s) are out
of warranty, request a Prior Authorization # for goodwill consideration prior to completing the
Campaign.
Service Procedure:
NOTICE








Ensure the GDS Mobile and the vehicle’s battery are fully charged. Run the engine
to charge the battery if necessary before attempting any updates.
Turn off all lamps and do not leave the head lamp switch in auto mode. Turn off all
accessories (including heater, A/C, blower, radio, seat warmer, defroster, etc.). Do
not allow the battery to be discharged during update.
Perform update with the ignition switch in the ON position.
Be careful not to disconnect any cables connected to the vehicle or scan tool
during update.
Do not start the engine during update.
Do not turn off the ignition switch during update unless specifically directed by
the GDS Mobile.
Ensure BOTH the Engine ECM and Cluster are updated to complete this TSB.
Check the ROM ID of the vehicle’s ECM and cluster and reference the ROM ID
Information Table before attempting any updates.
1. Connect the VCI-II into the vehicle's DLC
connector under the driver side instrument panel.
TSB #: 18-01-027
Page 3 of 7
SUBJECT:
SUBJECT:
SONATA ECM & CLUSTER UPDATE / PRODUCT IMPROVEMENT (SERVICE CAMPAIGN 953)
2. With the ignition in the ON position, open the
GDS app on the GDS Mobile. Confirm GDS
communication with the vehicle and use the AUTO
VIN button (A) to detect the vehicle’s VIN.
A
3. Select ECU Upgrade from the GDS main screen
and then select Auto Mode.
NOTICE
Do not update using Manual Mode
unless the Auto Mode fails.
4. Under System, select Engine to update the
engine ECM. Then select ID Check to search for
available updates.
TSB #: 18-01-027
Page 4 of 7
SUBJECT:
SUBJECT:
SONATA ECM & CLUSTER UPDATE / PRODUCT IMPROVEMENT (SERVICE CAMPAIGN 953)
5. Confirm the ROM IDs match those in the ROM
Information table for the vehicle specification. Select
the event under Event Group and then select
Upgrade to start the update.
The update is performed in two parts. Follow the
prompts on the GDS to complete the update.
NOTICE
Do not touch the GDS buttons (‘Back’,
‘Home’, etc) while performing the
update. Do not start the engine.
6. Once the update is performed successfully, select
OK to continue. When prompted to run a fault code
search, select Yes to check for DTCs. Clear all
DTCs if any are stored.
NOTICE
Various warning messages may
appear in the instrument cluster
during the update. Clear any DTCs
after the update.
7. Next update the cluster software starting with the
process outlined in Step 3. Under System in the
ECU Upgrade menu, select CLU to update the
cluster.
NOTICE
Ensure BOTH the Engine ECM and
Cluster are updated to complete this
TSB.
Do not update using Manual Mode
unless the Auto Mode fails.
TSB #: 18-01-027
Page 5 of 7
SUBJECT:
SUBJECT:
SONATA ECM & CLUSTER UPDATE / PRODUCT IMPROVEMENT (SERVICE CAMPAIGN 953)
8. When both the engine ECM and cluster updates
are completed, start the engine to confirm proper
operation.
9. Check for any DTCs and perform the appropriate
diagnostic service. Ensure no warning lights are
present to complete the procedure.
Manual Update Procedure:
NOTICE
The manual update should be performed only when the automatic update fails.
If automatic update fails, turn the ignition off for about 10 seconds and then place it back
in the on position to reset the control unit before performing a manual update.
1. Select ECU Upgrade from the GDS main screen
and then select Manual Mode.
NOTICE
Do not update using Manual Mode
unless the Auto Mode fails.
Do not touch the GDS buttons (‘Back’,
‘Home’, etc) while performing the
update.
Do not start the engine.
Various warning messages may appear
in the instrument cluster during the
update. Clear any DTCs after the update.
TSB #: 18-01-027
Page 6 of 7
SUBJECT:
SUBJECT:
SONATA ECM & CLUSTER UPDATE / PRODUCT IMPROVEMENT (SERVICE CAMPAIGN 953)
2. Under System, select Engine to update the
engine ECM and CLU to update the cluster. Select
the appropriate update by referencing the ROM ID
Information and password tables. Select Upgrade
and follow the prompts on the GDS to complete the
update.
NOTICE
Ensure the correct update is performed
by using the ROM ID Info tables. Any
attempt to update using an incorrect
ROM ID may cause the ECU to be
inoperative.
3. When both the engine ECM and cluster updates
are completed, start the engine to confirm proper
operation.
4. Check for any DTCs and perform the appropriate
diagnostic service. Ensure no warning lights are
present to complete the procedure.
Manual Mode Update Passwords:
Engine ECM
Update Name
LFA 2.4GDI 6AT -IMMO 39111-2GGK0
LFA 2.4GDI 6AT -IMMO 39111-2GGL0
LFA 2.4GDI 6AT +IMMO 39111-2GGK5
LFA 2.4GDI 6AT +IMMO 39111-2GGL5
LFA 2.0T-GDI 6AT +IMMO 39111-2GTE5
Password
1120
1121
1122
1123
1125
Cluster
Update Name
LFA STD CLUSTER(BASE) 94001-C2000 (ROM ID : 94001-C2000_A03)
LFA STD CLUSTER(BASE) 94001-C2000 (ROM ID : 94001-C2000_110)
LFA STD CLUSTER(SPORTS PACK) 94021-C2000 (ROM ID : 94021-C2000_A02)
LFA STD CLUSTER(SPORTS PACK) 94021-C2000 (ROM ID : 94021-C2000_100)
LFA SV CLUSTER(BASE) 94011-C2000
LFA SV CLUSTER(SPORTS PACK) 94031-C2000
TSB #: 18-01-027
Password
2000
2001
2002
2003
2004
2005
Page 7 of 7
SUBJECT:

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.