JTB00608NAS1

Service Bulletin Details

Public Details for: JTB00608NAS1

A vibration in the passenger may be evident compartment when the vehicle is not moving, transmission in park (p) or neutral (n), and when the engine speed decreases from 900 rpm to 800 rpm.


- 2018 -

Models from 2018
2018 JAGUAR F-PACE
2018 JAGUAR XE
2018 JAGUAR XF 
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx
JTB00608NAS1
TECHNICAL BULLETIN
16 JUL 2018
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with
the knowledge, tools, and equipment required to do the job properly and safely. It informs these
Technicians of conditions that may occur on some vehicles, or provides information that could assist in
proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a
Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar
service facility to determine whether this bulletin applies to a specific vehicle.
INFORMATION
SECTION:
204-00: Suspension System
SUBJECT/CONCERN:
Vibration In Passenger Compartment When Not Moving
AFFECTED VEHICLE RANGE:
MODEL:
MODEL YEAR:
VIN:
ASSEMBLY PLANT:
APPLICABILITY:
F-PACE (X761)
2018
898729-899997
Solihull
INGENIUM I4 2.0L Diesel
F-PACE (X761)
2018 Onwards
240049 Onwards
Solihull
INGENIUM I4 2.0L Diesel
XE (X760)
2018 Onwards
P16864 Onwards
Castle Bromwich
INGENIUM I4 2.0L Diesel
XF (X260)
2018 Onwards
Y53222 Onwards
Castle Bromwich
INGENIUM I4 2.0L Diesel
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
1/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
A vibration in the passenger may be evident compartment when the vehicle is not moving, transmission in
Park (P) or Neutral (N), and when the engine speed decreases from 900 RPM to 800 RPM.
CAUSE:
This may be caused by the engine mounting vacuum control solenoid being manufactured away from the
required specification.
ACTION:
Should a customer express this concern, follow the Workshop Procedure below.
PARTS:
PART NUMBER
DESCRIPTION
QUANTITY
T2H37589
Engine Mounting Vacuum Control Solenoid - XE (X760), XF
(X260)
1
T4A1065
Engine Mounting Vacuum Control Solenoid - F-PACE (X761)
1
TOOLS:
Refer to Workshop Manual for any required special tools.
WARRANTY:
NOTES:
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
2/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx
Repair procedures are under constant review, and therefore times are subject to change; those
quoted here must be taken as guidance only. Always refer to JLR claims submission system to
obtain the latest repair time.
The JLR Claims Submission System requires the use of causal part numbers. Labor only claims
must show the causal part number with a quantity of zero.
DESCRIPTION
Engine Mounting Vacuum Control Solenoid Renew
SRO
12.45.05
TIME
(HOURS)
0.2
CONDITION
CODE
45
CAUSAL PART
T2H37589/T4A1065
NOTE:
Normal Warranty procedures apply.
COMPONENT LOCATION:
1
NOTES:
XF (X260) shown; others similar.
Some Some components are shown removed for clarity.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
3/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Component location.
WORKSHOP PROCEDURE:
1
2
Open the hood.
NOTE:
Some components are shown removed for clarity.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
4/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Disconnect the vacuum hose.
3
NOTES:
Some components are shown removed for clarity.
Do not discard the fasteners.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
5/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Disconnect the vacuum hose and do not discard the fasteners.
4
NOTES:
Some components are shown removed for clarity.
If equipped.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
6/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Release the park release cable move to the side.
5
NOTE:
Some components are shown removed for clarity.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
7/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Disconnect the electrical connector.
6
NOTES:
Some components are shown removed for clarity.
Do not discard the fastener.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
8/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Remove the engine mounting vacuum control solenoid and do not discard the fastener.
7
NOTES:
Some components are shown removed for clarity.
If equipped.
Do not discard the fastener.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
9/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Remove the fastener from the mounting bracket and do not discard the fastener.
8
NOTES:
Some components are shown removed for clarity.
If equipped.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
10/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Install the fastener from the original mounting bracket to the new mounting bracket.
9
NOTES:
Some components are shown removed for clarity.
Use the fastener from Step 6.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
11/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Install the engine mounting vacuum control solenoid.
10
NOTE:
Some components are shown removed for clarity.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
12/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Connect the electrical connector.
11
NOTES:
Some components are shown removed for clarity.
If equipped.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
13/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Install the park release cable.
12
NOTES:
Some components are shown removed for clarity.
Use the fasteners from Step 3.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
14/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Install the vacuum hose.
13
NOTE:
Some components are shown removed for clarity.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
15/16
7/16/2018
JTB00608NAS1 - Vibration In Passenger Compartment When Not Moving | TOPIx

Install the vacuum hose.
14
Close the hood.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=916276
16/16

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.