B160516

Service Bulletin Details

Public Details for: B160516

G12 phev - fuel line rattle noise. Customer reports rattling or humming noise coming from the rear area of the vehicle at engine speed range between 1,200-1,500 rpm. Interference between the fuel line quick connector and the side wall of a


- 2017 - 2016 -

Models from 2017
2017 BMW R NINE T
Models from 2016
2016 BMW 750LI
Page 1 of 2
SI B16 05 16
Fuel Supply Systems
November 2016
Technical Service
G12 PHEV - FUEL LINE RATTLE NOISE
MODEL
G12 PHEV (740xe)
Produced up to 09/29/2016
SITUATION
Customer reports rattling or humming noise coming from the rear area of the vehicle at engine
speed range between 1,200-1,500 rpm.
CAUSE
Interference between the fuel line quick connector and the side wall of a fuel tank.
CORRECTION
Isolate the fuel line’s quick connector with a piece of insulation foam.
PROCEDURE
For conditions that are similar to the situation described:
1. Locate the fuel line’s quick disconnect connector.
• General location of the fuel line quick connector:
passenger side, behind the fuel tank wall.
z
Specific location of quick connector (circled).
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/381... 1/5/2017
Page 2 of 2
2. Place a piece of the insulation foam between the
fuel line connector and the wall of the fuel tank.
3. Duplicate reported conditions and verify
effectiveness.
PARTS INFORMATION
Part Number
Description
Quantity
16 13 6 755 903
Insulation foam
(100x25x15mm)
1
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light
Trucks.
Defect Code:
1612023900
Labor Operation:
Labor Allowance:
Description:
16 99 000
4 FRU
Work time to insulate fuel line
connector (Main work)
2 FRU
Work time to insulate fuel line
connector (Plus work – Vehicle already
in the workshop)
Or:
16 99 000
[ Copyright ©2016 BMW of North America, Inc. ]
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/381... 1/5/2017


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.