Bmw R Nine T 2017
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the 2017 BMW R Nine T.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| BMW |
BMW VIN Decoder
Use the box here to look up VINs from BMW as well as other manufacturers
Frequently Asked Questions
-
Are there recalls for the 2017 BMW R Nine T?
- There are 3 recall(s) for the 2017 BMW R Nine T, additional information is below.
NHTSA Mandated Recalls
Recall 127376 [USA]: If the right-side pivot pin loosens, the handling and stability of the motorcycle may be affected, increase the risk of a crash.
Recall 2017399 [Canada]: Structure
Recall 2017082 [Canada]: Emissions
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- MC330224 - POWER TRAIN: After close inspection of the manufacturing process, there is a weld seam at the hollow shaft and crown wheel connection in the rear drive that is not to specification in a few rear\drives. Depending on riding habit, this can lead to slippi
- B611305 - ELECTRICAL SYSTEM: The electrical system of bmw vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on ho
- MC000222 - BRAKES (PWS): Bmw motorrad is aware of a number of cases in which the screw connections of the paralever link and/or the rear brake caliper have loosened in customer vehicles while driving.
- SISIB011317 - EQUIPMENT: Shipping specific non-deployed vehicle safety devices to lighting resources, llc
- SIM010917 - EQUIPMENT: Shipping specific non-deployed vehicle safety devices to lighting resources, llc. This service information bulletin provides information on shipping "specific" noin-deployed vehicle safety devices that are classified as dangerous goods (dg)
- B3106170621 - EQUIPMENT: Please return all part(s) to your facing regional distribution center (rdc). Submit for return using a yr26 damage claim with order reason bm2. A valid bmw delivery and delivery item number must be entered, and tec73 must appear in the text
- B170121 - FUEL SYSTEM, GASOLINE: The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
- MC000521 - ELECTRICAL SYSTEM: One of the following situations can occur when connecting to bn2000 motorcycles: 1. The installed control units cannot be found when reading out with ista. 2. Control units initially communicate after connecting to the vehicle, but communic
- MC610821 - ELECTRICAL SYSTEM: When diagnosing fault codes (0x3a13d7, 0x3a13d9), technicians erroneously condemn the electronic throttle grip, which analyses show is rarely the culprit.
- MC110521 - POWER TRAIN: During quality analysis, an issue was identified with a small group of sixteen (16) motorcycles that mayaffect crankshaft bearing wear.
- MC60214068 - ENGINE (PWS): One or more of the 12 bolts on the r nine t silencer are missing, see accompanying picture.
- MC59823415 - ENGINE (PWS): Oil leak immediately after replacing cylinder head cover seal set.
- MC3600118 - WHEELS: During the course of quality analysis, it was determined by bmw motorrad that in the production period from february 2018 to end of june 2018, cross-spoked wheels with reduced spoke tension have been produced.
- MC62694734 - POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT:SEAL: Counterbalance shaft seal leaking. Faulty seal contact surface of the balance weight.
- B001016 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: ?Technical service new vehicle delivery to center: vehicle will not start while in transport mode
- B661917 - LANE DEPARTURE: ?Service action: check and replace lane change warning sensor. The lane change warning sensor may have been produced with faulty components. This may lead to a failure of the lane change warning system (sww). Lane change warning sensor hard
- B111117 - ENGINE (PWS): ?Engine leak diagnosis on turbocharged v8 engines. When diagnosing an engine oil leak or a coolant leak on turbocharged v8 engines it is necessary to use a borescope to identify if the source of the leak is from under the turbochargers. En
- B720417 - SEAT BELTS: False warnings that the front passenger seat is occupied without the seat belt buckled. Acoustic and visual warnings indicate that the front passenger seat is occupied and the seat belt is not fastened, when the seat is actually unoccupied.
- B170418 - ENGINE AND ENGINE COOLING: Delivery stop. Low temperature coolant system.A delivery stop has been issued (effective october 16, 2018) on model year 2019 bmw 5 and 7 series vehicles that have been produced from september 13-14, 2018. There is a possibility that the af
- MC2300117 - EQUIPMENT: Customer complains about an operating failure on the left or right multifunction switch.
- B620717 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Instrument cluster remains dark & does not start up. The instrument cluster display remains dark when the vehicle is started. Software in the instrument cluster incorrectly initiates the protection mode causing the cluster display to remai
- B512117 - STRUCTURE:BODY:DOOR : "rattle in the ""replacement"" door assembly. Rattle or vibration noises from door while driving on uneven surface after door replacement. Note: this issue only occurs in replacement door assemblies - this not a vehicle production issue c
- MC59686312 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Speedometer display incorrect. Speddometer displays faster than actual speed.
- MC57213601 - EQUIPMENT: Pillion seat cover - snap-lock coupling may become damaged. Cause is burr in the opening in the brace of the storage cover.
- MC62133778 - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): Map data should be stored on a 64 gb sd card. In garmin express the note appears that a maximum of 32 gb is possible.
- MC61461571 - EXTERIOR LIGHTING:HEADLIGHTS: Mist forms in the headlight. This is due to condensation and goes away again.
- MC61348081 - ELECTRICAL SYSTEM:IGNITION: The ignition remains on, even though the ignition swithc has been turned off. The relatively high power requirement of the abs contro,l unit can cause the contacts to bond.
- B661416 - EQUIPMENT: "parking assistant" operation is jerky. After programming with ista/p versions 3.59.0 and/or 3.59.1, vehicle operation is jerky when using the parking assistant. Sas (optional equipment system) control module software.
- B661016 - EQUIPMENT:ELECTRICAL: Garage door opener cannot be programmed. The vehicle's rear view mirror integrated universal remote control is incompatible with some garage door (or fence) opener devices installed at the driver's residence and/or business. If the garage d
- B652016 - ELECTRICAL SYSTEM: Cid split screen always changes back to compass display. After starting the vehicle, the control display (cid) right side (split screen) display does not stay on the last selection made by the driver. Within 30 seconds of starting the right
- B270116 - POWER TRAIN: Service action: replace the dust boot on the transfer case. The dust boot (gaiter) for the front drive shaft at the transfer case may allow debris to enter the joint for the front driveshaft at the transfer case. The material of the dust bo
- B121316 - ELECTRICAL SYSTEM: N63r map thermostat faults this service information bulletin supersedes si 12 13 16 dated may 2016. The service engine soon light is on with one or more of the following fault codes: 1d2009 - characteristic map thermostat: clamped closed 10
- B841016 - ELECTRICAL SYSTEM:SOFTWARE: Roller sunblind not able to be controlled with bmw touch command. Bmw touch command operation of one of the side window roller sunblind's by itself is not possible without prior operation from the control button in that door panel. All othe
- B652016 - ELECTRICAL SYSTEM:SOFTWARE: Cid split screen always changes back to compass display. This service information bulletin replaces si b65 20 16 dated june 2016. After starting the vehicle, the control display (cid) right side (split screen) display does not stay on the l
- B340916 - POWER TRAIN: "power loss: ccm 350. Vehicle seems to have no power. Ccm 350: ""it is possible to continue to drive. All-wheel drive system."" displayed one of the following fault memory entries may be stored: dsc_g11: o d36500 - message fault (xdrive act
- B340116 - ELECTRICAL SYSTEM: "dynamic stability control (dsc) warning lamp, lights up this service information bulletin supersedes si 34 01 16 dated february 2016. Various ""dsc warning lamps lights up in the instrument cluster, including the display: ""suspension cont
- B320916 - STEERING: Groaning/cracking noise during steering. A significant cracking noise/groaning noise coming from the area of the steering shaft/steering column while steering. Steering shaft double cross joint.
- B320516 - STEERING: Erroneous electric power steering (eps) fault this service information bulletin supersedes si 32 05 16 dated april 2016. Information this is an erroneous fault! After a terminal status change, the fault disappears until the next diagnostic
- B122416 - ENGINE AND ENGINE COOLING: "service action: reworking the phev screw connection of the coolant line on electrical machine electronics. The screw connection of the coolant lines to the electrical machine electronics (eme) may not have been properly tightened. Affected
- B840416 - ELECTRICAL SYSTEM: Sos malfunction displayed. An sos malfunction is seen in the kombi. When pressing the e-call/sos button in the overhead console, nothing happens. Fault code b7f33c (internal ecu error) is stored in the telematics control unit (atm/tcb2). Th
- B661916 - ELECTRICAL SYSTEM: Traffic jam assistant becomes inoperative during use. The traffic jam assistant becomes inoperative while driving. Vibration actuator causes inadvertent contact between steering wheel trim and steering wheel, changing capacitance of steerin
- B370116 - ELECTRICAL SYSTEM: Vdp programming aborts. The system may abort while programming the vertical dynamic platform (vdp) control unit. Vdp control unit software
- B612516 - ELECTRICAL SYSTEM: "delivery stop: program control unit for obd fault. There may be a software error in the dme (digital motor electronics) and/or bdc (body domain controller) which sets an obd (on board diagnostic) fault entry and trigger the cel (check engi
- B612416 - ELECTRICAL SYSTEM: "sme fault code 21f21f. The fault code (fc) ""21f21f - high-voltage system: monitoring of insulation resistance deactivated due to fault of the safety box"" is stored in the battery management electronics (sme). The fault does not set any c
- B122716 - ELECTRICAL SYSTEM: "diagnosing non functioning ""edrive"". The customer complains that the vehicle will not go into ""edrive"", and in some cases ""edrive"" is greyed-out in the control display (cid) and is not selectable. Also, there are no pertinent electri
- B661117 - VEHICLE SPEED CONTROL:CRUISE CONTROL: Acc (active cruise control): cannot delete fault code 022126. Acc fault code 022126 does not delete from acc control unit fault code memory. May occur in combination with under-voltage fault codes: * bdc 0x80402f - battery deeply discharged
- B650414 - AIR BAGS: "airbag warning light: acsm fc 930a60 or 930a1c seat occupancy detection. According to the customer, the airbag warning light was on, but it may not be on when the vehicle arrives in the workshop. 1. Acsm fault code ""930a60 - seat occupanc
- B620717 - ELECTRICAL SYSTEM: Instrument cluster remains dark & does not start up this service information bulletin replaces si b62 07 17 dated may 2017 what's new: changed affected production dates & options procedure wording changed i-level of software. G12 (7 seri
- B340517 - SERVICE BRAKES, HYDRAULIC: Ticking noise while cornering without the brakes applied. Ticking noise coming from front wheel while cornering without brakes applied; noticeable at low speeds. Vehicle must be moving. Microscopic slippage of contact surface interface betw
- B240516 - POWER TRAIN: """transmission overheat warning"" message is displayed. Check control message ""transmission overheating warning"" is displayed. One or more of the following fault codes are stored in the transmission control unit (egs): * 4209a1 - tempera
- B514516 - VISIBILITY: Sunroof noise while driving. Rattling noise from the vicinity of the overhead control center while driving, especially on rough roads. Cause cowl-retaining rivet interfering with slide/tilt sunroof motor. Replace motor, if necessary.
- B512216 - VISIBILITY:SUN/MOON ROOF ASSEMBLY: Sunroof reopens when closing from tilt position this service information bulletin supersedes si b51 22 16 dated august 2016.. Sunroof reopens when initiating automatic close from tilt position (momentary push) even though track is free of o
- B160516 - ENGINE AND ENGINE COOLING: G12 phev - fuel line rattle noise. Customer reports rattling or humming noise coming from the rear area of the vehicle at engine speed range between 1,200-1,500 rpm. Interference between the fuel line quick connector and the side wall of a
- B840214 - EQUIPMENT: Connecteddrive/bmw assist system diagnosis information this service information bulletin replaces si b84 02 14 dated july 2014 what's new: model - removed models which no longer support bmw assist functionality and added new models. Proce
- B620817 - ELECTRICAL SYSTEM: Instrument cluster cannot be programmed. When programming the vehicle the instrument cluster fails to program. Missing software for instrument cluster.
- B612817 - ENGINE AND ENGINE COOLING: "sme fault code 21f04b. One or several of the following check control messages (ccm) may be displayed: ""engine fault! Power loss"" (ccm-id: 29) ""powertrain malfunction!"" (ccm-id: 633) ""hybrid system malfunctioning!"" (ccm-id: 585) note:
- B340517 - WHEELS: Ticking noise while cornering without the brakes applied. Ticking noise coming from front wheel while cornering without brakes applied; noticeable at low speeds. Vehicle must be moving. Microscopic slippage of contact surface interface betw
- B621017 - ELECTRICAL SYSTEM: Erroneous service inclusive cbs display. After pre-delivery check or after instrument cluster exchange, bmw service inclusive is displayed although the vehicle does not feature the optional service inclusive coverage. Instrument cluster dis
- B613417 - ENGINE AND ENGINE COOLING: "service action: program control units (gws). After the engine start-up, gear (drive or reverse) cannot be selected. Message ""no drive position change possible"" is displayed in the cc display. Gear can be selected only after vehicle goes
- B512717 - EQUIPMENT ADAPTIVE/MOBILITY: Rear window roller sunblind does not deploy. Rear roller sunblind will not deploy properly on one or both sides. Connection points to slider or roller are broken.
- B170517 - POWER TRAIN: Service action: replace the mount for the transmission oil cooler thermostat. There may be a rattling noise coming from the engine area at the transmission oil cooler thermostat or (on xdrive models only) the transmission oil cooler lines c
- B840311 - EQUIPMENT: "?Telematics device spares replacement part activation via dcsnet for bmw assist what's new: ? Model: all models added along with 6ac option code ? Situation: all information added ? Information: deleted cdma related information and added a
- B620617 - ELECTRICAL SYSTEM: Instrument cluster resets. Instrument cluster sporadically flickers and/or fails. Instrument cluster performs spontaneous reset. Instrument cluster software.
- B620417 - EQUIPMENT:ELECTRICAL: ?Wrong outside temperature display. During stop and go or slow driving, with the engine at operating temperature, the ambient outside temperature display deviates in the instrument cluster by up to +10 degrees from the real ambient temperat
- B613014 - ELECTRICAL SYSTEM: "?Bmw maintenance program: 12-volt battery replacement measure what's new: ? "models" updated: model year 2017 vehicles added ? "models" updated: model year g12 (7 series) excluded from program ? "procedure" updated: n63r engine added to 20
- B612217 - ELECTRICAL SYSTEM: Diagnostic communication with flexray control modules not possible. There are no customer complaints associated with this issue. The following control modules do not respond when diagnosing the vehicle with ista: advanced crash and safety m
- B611817 - ELECTRICAL SYSTEM: "sme fault code 21f02a. Upon starting the vehicle, the following cc message is displayed to the customer: "powertrain malfunction!" (ccm-id: 633) in addition, one or several of the following cc message(s) may be displayed: "charging not pos
- B340417 - ELECTRICAL SYSTEM: "?Dsc warning lamp illuminated after transport mode deactivation. After vehicle start-up from transport mode, the dsc warning lamp flashes. Cc message "driving stabilization restricted" is displayed in the cid. The following faults are ente
- B340317 - ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC): Dynamic stability control failure. Instrument cluster indicates dynamic stability control (dsc) failure. You cannot establish communication with the dsc control unit. Associated control units (dme, acsm) register dsc-related communication t
- B130217 - FUEL SYSTEM, GASOLINE: ?Service action: check routing of fuel line. The fuel feed line is not correctly routed behind the tank ventilation line and may conflict with components of the intake system. This may cause abrasion on the protective fabric coating of the
- B112216 - ENGINE AND ENGINE COOLING: ?"engine oil pressure" on low mileage cars. Check control message (ccm-212) states: "engine oil pressure. Stop carefully" the following codes may be stored in the dme fault memory" 1C2002 - engine oil pump, pressure too low 1fb801 - ccm (id
- B662416 - LANE DEPARTURE: ?Blindspot detection warning: false activation whats new: ? Correction updated: check if hc2 sensor shield previously installed ? Procedure updated: removed the programming step because it is no longer needed ? Parts information updated: no
- B661016 - EQUIPMENT:ELECTRICAL: "?Garage door opener cannot be programmed whats new: ? ""model"": g30 (5 series) added . The vehicle's rear view mirror integrated universal remote control is incompatible with some garage door (or fence) opener devices installed at the dri
- B660317 - ELECTRICAL SYSTEM: Automatic park distance control activates too late . Automatic park distance control (apdc) signal is being activated when vehicle is uncomfortably close to obstructions at the corner of the vehicle. Software modification in integration le
- B660117 - EQUIPMENT: Display key: service interval display changes . Information replacing parts or programming the vehicle will not rectify the situation. The display key information was modified, as shown in the graphics below, to eliminate any confusion tha
- B650617 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: ?Satellite radio deterioration in reception quality due to new cellular frequencies . Information inform the customer that the introduction of these expanded frequencies by the wireless mobile providers may be influencing reception qualit
- B650517 - EQUIPMENT: ?Service action: retrofitting rear axle ground strap for radio interference . Bad radio reception and strong disruptions in the am radio band. The ground cable from the rear axle to the body was not installed in the vehicles.
- B611317 - ELECTRICAL SYSTEM: ?Windshield wipers in emergency mode . Windshield wipers are always on regardless of the switch position turn signals and horn are also non-functional. Possibilities include: faulty steering column switch cluster. Faulty plug connection a
- B540117 - VISIBILITY:SUN/MOON ROOF ASSEMBLY: ?Glass roof not closing . Glass roof will not close. At least one of the following fault codes is stored: 30215: slide/tilt sunroof: invalid characteristic curve, no standardization exists 30295: electric sliding headliner: invalid characte
- B520816 - SEATS: "front seat adjustment, wrong display/error recognition (faulty detection) in cid what is new ? G30 has been added. ? ""correction"" has changed from programming solution to replace seat switch. ? "procedure" has been changed to replace th
- B170217 - ENGINE AND ENGINE COOLING: "?Check control (cc) message:""coolant level too low!"" is displayed . Cc message: ""coolant level too low!"" appears in the display. The cooling system wasn't efficiently bled during the factory fill."
- B110617 - ENGINE AND ENGINE COOLING: ?Service action: n63r engine - replace engine oil and filter. Premature engine wear may occur if an interim engine oil service is not performed before the first engine oil service is recommended or due.
- B660217 - ELECTRICAL SYSTEM: "drivers assistance limited support ccm displayed . While driving, the following conditions may exist: ccm (check control message) for the drivers assistance system limited support is displayed. The following drivers assistance features ar
- B660117 - ELECTRICAL SYSTEM: Display key: service interval display changes . Information replacing parts or programming the vehicle will not rectify the situation. The display key information was modified, as shown in the graphics below, to eliminate any confusion tha
- B610317 - ELECTRICAL SYSTEM: "change to phev hv battery cell modules. Information there has been a change to all generation 3 phev high-voltage (hv) battery cell modules. The number of temperatures sensors on the cell modules has decreased from 4 sensors to 3 sensors.
- B540907 - STRUCTURE:FRAME AND MEMBERS: Retractable hardtop status request supplement