B130215

Page 1 of 4
SI B13 02 15
Fuel Systems
May 2015
Technical Service
SUBJECT
Service Action: N63 Replace High-Pressure Fuel Pumps
MODEL
F01 (7 Series Sedan)
F02 (7 Series Sedan LWB)
F04 (ActiveHybrid 7)
F07 (5 Series Gran Turismo)
F10 (5 Series Sedan)
F12 (6 Series Convertible)
F13 (6 Series Coupe)
E70 (X5)
E71 (X6)
E72 (ActiveHybrid X6)
SITUATION
The high-pressure pump may fail, resulting in an engine malfunction warning and reduced engine output.
AFFECTED VEHICLES
This Service Action involves F01, F02, F04, F07, F10, F12, F13, E70, E71, and E72 vehicles with the N63
engine produced from January 1, 2011 to August 8, 2011.
Vehicles which require this Service Action to be completed will show it as “Open” when checked either in the
"Service Menu" of DCSnet (Dealer Communication System) or with the Key Reader.
CAUSE
The high-pressure pump quantity control valve may fail.
PROCEDURE
Replace both high-pressure pumps. Refer to the following Repair Instruction 13 51 065, “Remove and
installing/replacing the left high-pressure pump (N63),” and 13 51 070, “Remove and installing/replacing the
right high-pressure pump (N63).”
Important Note: Below, find the removal and installation of the crankcase ventilation lines (hoses) if the
vehicle has had the procedures described in B11 06 14 and B11 16 14 already performed.
Gently pull the hose in the direction of
the arrow (1) while releasing the four
locking tabs (2) with a small o-ring
pick or suitable tool.
Disconnect connecting line 3.
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/229... 6/4/2015
Page 2 of 4
PARTS INFORMATION
Part Number
Description
Quantity
13 51 7 595 339
High-pressure pump
2
13 51 7 590 275
Screw
4
07 11 9 905 147
Hexagon screw with washer
2
07 14 7 029 829
Hexagon bolt
6
WARRANTY INFORMATION
Reimbursement for this Service Action will be via normal claim entry utilizing the following information:
Defect Code:
00 13 30 02 00
Labor Operation:
Labor Allowance:
Description:
00 62 994
Refer to KSD2
Replace both of the high-pressure
pumps
Or:
Associated work carried out in conjunction with SI B11 06 14 - N63 Engine: Customer Care Package
Labor Operation:
00 63 511
Labor Allowance:
Description:
Refer to KSD2
Replace both of the
high-pressure pumps
(belonging to 00 62
111)
Refer to KSD2
Replace both of the
high-pressure pumps
(belonging to 00 62
112)
Or:
00 63 512
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/229... 6/4/2015
Page 3 of 4
Or:
00 63 513
Refer to KSD2
Replace both of the
high-pressure pumps
(belonging to 00 62
113)
Refer to KSD2
Replace both of the
high-pressure pumps
(belonging to 00 62
114)
Refer to KSD2
Replace both of the
high-pressure pumps
(belonging to 00 62
115)
Refer to KSD2
Replace both of the
high-pressure pumps
(belonging to 00 62
116)
Refer to KSD2
Replace both of the
high-pressure pumps
(belonging to 00 62
117)
Refer to KSD2
Replace both of the
high-pressure pumps
(belonging to 00 62
118)
Or:
00 63 514
Or:
00 63 515
Or:
00 63 516
Or:
00 63 517
Or:
00 63 518
Or:
Associated work carried out in conjunction with SI B11 16 14 - N63 Engine: Check Timing Chain
Labor Operation:
00 63 519 (Use FRU number
only if replacing the timing
chain. For checking the timing
chain, use FRU numbers from
point 2)
Labor Allowance:
Description:
Refer to KSD2
Replace both of the
high-pressure pumps
(belonging to 00 62 916
- 00 62 974)
Previous Customer-pay Repairs
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/229... 6/4/2015
Page 4 of 4
BMW of North America, LLC will provide reimbursement for “qualifying customer-pay repairs” that were
performed on an eligible vehicle prior to the release of the N63 Replace High-Pressure Fuel Pumps Service
Action.
Customer-pay repairs are subject to the applicable vehicle and coverage eligibility requirements, exclusions,
and limitations that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
Repairs performed on ineligible vehicles, vehicles not included in this Service Action and/or the diagnosis
and repair of other unrelated issues do not qualify for reimbursement.
To request reimbursement for a “qualifying customer-pay repair” performed either by an authorized BMW
center or independent repair shop, please have your customer submit a reimbursement request online at
www.BMW-RP.com under the following reference:
• B-R 2015 N63 High-Pressure Fuel Pumps
Note: Reimbursement requests submitted under an incorrect and/or different reimbursement program
or action will not be accepted.
Reimbursement Procedure
To initiate the online process, the customer will be asked to attach PDF files of the required documentation;
this is outlined in the attachment below.
Alternatively, he/she may mail or fax his/her request and documentation directly to the BMW Customer
Reimbursement Center.
For more information, please refer to the PDF attachment: “B130215_Customer Pay Reimbursement
Procedure.”
Note: A copy of this attachment can be provided to the customer.
ATTACHMENTS
View PDF attachment B130215_Customer_Pay_Repairs.
[ Copyright ©2015 BMW of North America, Inc. ]
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/229... 6/4/2015