K10075112
Service Bulletin Details
Public Details for: K10075112
Remote control central door lock, programming; key fob cannot be programmed or does not work after programming - model year 2018 and newer
Models from 2019
2019 VOLVO VAH |
2019 VOLVO VHD |
2019 VOLVO VNL |
2019 VOLVO VNM |
2019 VOLVO VNR |
2019 VOLVO VNX |
Models from 2018
2018 VOLVO VAH |
2018 VOLVO VHD |
2018 VOLVO VNL |
2018 VOLVO VNM |
2018 VOLVO VNR |
2018 VOLVO VNX |
Solution K10075112 Thursday, November 1, 2018 7:14:24 PM CET Mack Models Mack Model TE-TerraPro , LR , LEU , MRU-TerraPro , GR-Granite , PI-Pinnacle , AN-Anthem , CHU-Pinnacle, Axle back , CXU-Pinnacle, Axel forward , GU-Granite , TD-Titan Volvo Models Volvo Model VNR , VNX , VNL , VNM , VHD , VAH Engine family Engine family 11L Engine , 13L Engine , MP7 , MP8 Emission Standard Emission Standard 2018 , OBD2017 ** SOLUTION ** Title Remote Control Central Door Lock, Programming; Key Fob Cannot Be Programmed Or Does Not Work After Programming - Model Year 2018 And Newer Cause Technicians cannot achieve key fob programming mode due to the ECU's extended power down time. Solution Due to the ECU's extended power down time it is recommended to move the ignition switch to the drive position and remove the ingnition fuse 4 times as an alternative to cycling the ignition switch 4 times. Doing this will power down the system faster so this step can be completed within the 15 second time frame. The remaining steps are as follows. 1. The direction indicator lamps remain on and the system is now ready to be programmed. Note: The instrument cluster does not indicate programming mode. 2. Press button 1 or 2 on the original remote control. Note: It is recommended that at least one remote control to be secured at all times, to avoid the replacement of the module-remote control pair, if both original remote controls are missing. Note: This step is a security feature. 3. The direction indicator lamps turn off for approx. 1 second to indicate that the module has recognized the original remote control. Note: No reprogramming is possible without an original remote control. 4. Press button 1 or 2 on each remote control that is desired to be programmed. 5. The direction indicator lamps go out for approx. 1 second to indicate that the new remote control has been added. 6. To program the next remote control repeat Step 4. The system will exit programming status after 15 seconds if no additional remote controls are programmed. This is also the maximum time between activating the remote control within the programming cycle. The system will also exit after eight remote controls are programmed. 7. When the remote control returns to the 'Normal' mode, If no buttons are pressed, then the last remote control programmed, remains current for the system. Note: Due to the security feature, all desired remote controls to be programmed must be programmed, before the programming mode is exited into the Normal mode. To add a new remote control and keep the previous ones, all steps must be taken again having all the controls ready. The module starts each programming process anew. Solution visibility Dealer distribution Function(s)/component(s) affected Function affected FSB , immobiliser , doors Function Group Function Group 364 electrical item Customer effect Main customer effect calibration/programming/pairing/missing operation , locking/unlocking Administration Author A241298 Dealer ID A241298 Last modified by A241298 Creation date 04-10-2018 15:10 Date of last update 23-10-2018 21:10 Review date 02-04-2019 00:04 Status Published Variantes Kola 3AX - DOOR LOCK CAB LOCK-CTL - CENTRAL DOOR LOCKING , LOCK-REM - CAB DOOR LOCK, EXTERNAL REMOTE CONTROL , LOCK-ALL - CENTRAL DOOR LOCK. + CUT OF THE ELECTRICITY OF THE TRUCK.