161514

Page 1 of 3
SI B16 15 14
Fuel Supply Systems
December 2014
Technical Service
This Service Information bulletin supersedes SI B16 15 14 dated October 2014.
designates changes to this revision
SUBJECT
NVLD Tank Leakage FC 190302 Fuel Tank Ventilation and Purge Air System Micro Leak
MODEL
F01 (7 Series Sedan)
F02 (7 Series Sedan)
F06 (6 Series Gran Coupe)
F07 (5 Series Gran Turismo)
F10 (5 Series Sedan)
F12 (6 Series Convertible)
F13 (6 Series Coupe)
F15 (X5)
F16 (X6)
F22 (2 Series Coupe)
F25 (X3)
F30 (3 Series Sedan)
F31 (3 Series Sports Wagon)
F32 (4 Series Coupe)
F33 (4 Series Convertible)
F34 (3 Series Gran Turismo)
F36 (4 Series Gran Coupe)
F80 (M3 Sedan)
F82 (M4 Coupe)
F83 (M4 Convertible)
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16800.2.B16151... 12/25/2014
Page 2 of 3
Produced to 5/2014
SITUATION
The engine malfunction warning is illuminated and the following fault code is stored in the DME memory:
z
FC 190302 Fuel tank ventilation and purge air system micro leak leakage greater than 0_5 mm
CAUSE
Contamination of the NVLD pressure switch electrical contacts
PROCEDURE
1. Remove and inspect the part number on the NVLD pressure switch per Repair Instruction 16 13 521,
“Removing and installing/replacing pressure switch for Natural Vacuum Leak Detection (NVLD).”
2. Inspect the part number of the NVLD pressure switch. If the pressure switch is not one of the following,
replace the pressure switch with one of the part numbers listed below.
Part Number
Model
16 13 7 333 301
F07, F10, F12 , F13, F15, F16, F06, F01, F02, F25
16 13 7 333 302
F22, F30, F31, F32, F33, F34, F36, F80, F82, F83
Note: The current version of ETK for F06, F07, F10, F12 and F13 models does not show the correct
supersession from the current pressure switch P/N 16 13 7 274 147 to the new pressure switch P/N 16 13 7
333 301.
Do not use P/N 16 13 7 274 147 for this complaint.
3. If the vehicle has the correct pressure switch listed above, the vehicle may have a leakage in the system.
Perform all diagnostic checks that are recommended by the applicable test plans for the faults stored.
WARRANTY INFORMATION
Covered under the terms of the BMW New Car/SAV Limited Warranty or the BMW Certified Pre-Owned
Program.
Defect Code:
16 13 11 12 00
Labor Operation:
Labor Allowance:
Description:
00 00 006
Refer to KSD2
Performing “vehicle test” (with vehicle
diagnosis system – checking faults)
Refer to KSD2
Connect an approved battery
charger/power supply (indicated in
KSD2 as “Charging battery”)
Refer to KSD
Removing and installing/replacing
pressure sensor/switch for leak diagnosis
module (NVLD). After vehicle
diagnosis.
And:
61 21 528
And:
16 13 521
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16800.2.B16151... 12/25/2014
Page 3 of 3
Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair,
use the Plus code labor operation 00 00 556 instead.
Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of
the last 7 digits of the Vehicle Identification Number (VIN). Click on the “Search” button, and then enter the
applicable flat rate labor operation in the FR code field.
Other Repairs
If performing ISTA diagnostics and related test plans results in other eligible and covered work, claim this work
with the applicable defect code andr labor operations listed in KSD2.
[ Copyright ©2014 BMW of North America, Inc. ]
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16800.2.B16151... 12/25/2014