SSM74096

10/1/2018
TOPIx - SSM74096 - Passive Start function does not work after Pre Delivery Inspection has been completed
Reference
SSM74096
Models
XE / X760
XF / X260
Title
Passive Start function does not work after Pre Delivery Inspection has been completed
Category
Diagnostic Software Hardware
Last modified
21-Sep-2018 00:00:00
Symptom
000101 Diagnostic Concerns
Content
Issue:
The retailer may notice that the passive start function does not work after the Pre Delivery Inspection (PDI) has been completed using
Pathfinder.
Cause:
The Passive Start has been disabled at the Castle Bromwich manufacturing plant incorrectly and PATHFINDER does not re-enable
Passive Start during the PDI application.
Action:
1. Open the ECU diagnostics menu
2. Open the Remote Function Actuator (RFA) menu.
3. Open the ECU functions menu.
4. Run the application ‘Passive Entry / Passive start enable".
5. Check the operation of the keys.
If these instructions do not rectify the concern, submit a Technical Assistance (TA) to Local Technical Support.
Permanent Corrective Action:
The Permanent Corrective Action will be released on a later software release.
Technicians - Please rate this SSM and provide comments so that future communications can be improved.
1 = Poor – Basic information provided – The SSM does not help me resolve the customer concern.
3 = Average – Adequate information provided – The SSM partially helps me resolve the customer concern.
5 = Excellent – All required information provided to resolve the customer concern.
https://topix.landrover.jlrext.com/topix/content/document/view?id=927814
1/1