23-020-15

Service Bulletin Details

Public Details for: 23-020-15

Replace missing manual release cover for the electric fuel door this bulletin involves installing a cover for the fuel door manual release cable. The customer may describe a loose cable hanging in the right rear of the cargo compartment


- 2015 -

Models from 2015
2015 JEEP RENEGADE
NUMBER:
GROUP:
DATE:
23-020-15
Body
May 23, 2015
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE
TRANSMITTAL (RRT) 15-058. ALL APPLICABLE SOLD AND UN-SOLD RRT VIN's
HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS
APPLICABLE TO THE VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN
TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF
WARRANTY.
SUBJECT:
Replace Missing Manual Release Cover For The Electric Fuel Door
OVERVIEW:
This bulletin involves installing a cover for the fuel door manual release cable.
MODELS:
2015
(BU)
Jeep Renegade (Latin America Vehicles Only)
NOTE: This bulletin applies to vehicles built on or before April 09, 2015 (MDH
0409XX).
SYMPTOM/CONDITION:
The customer may describe a loose cable hanging in the right rear of the cargo
compartment area.
DIAGNOSIS:
If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. For all other
customers that describe the symptom/condition listed above, perform the Repair
Procedure.
PARTS REQUIRED:
Qty.
Part No.
Description
1
735623051
Cover
23-020-15
-2-
REPAIR PROCEDURE:
1. Open the rear hatch (Fig. 1).
Fig. 1 Rear Hatch
2. If cover is not present and cable (1) is hanging perform the repair (Fig. 2).
Fig. 2 Loose Cable
1 - Cable
-33. Install the cable (2) onto the new cover (1) (Fig. 3).
Fig. 3 Cable Insertion
1 - Cover
2 - Cable
4. Make sure the cable is fully inserted into the cover (1) as shown (Fig. 4).
Fig. 4 Cable Fully Inserted Into Cover
1 - Cover
23-020-15
23-020-15
-4-
5. Install the cover and cable into trim cover as shown and turn the cover 90°
counterclockwise until it’s completely locked into place (Fig. 5).
Fig. 5 Installing Cover
6. Make sure the cover (1) is flush and installed properly (Fig. 6).
Fig. 6 Cover Installed
1 - Cover
-5-
23-020-15
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation
No:
23-41-38-90
Description
Install Release Cover for Manual Fuel
Door (1 - Semi-Skilled)
FAILURE CODE:
ZZ
Service Action
Skill Category
6 - Electrical
and Body
Systems
Amount
0.2 Hrs.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.