23-020-15 REVA
Service Bulletin Details
Public Details for: 23-020-15 REVA
Replace missing manual release cover for the electric fuel door this bulletin involves installing a cover for the fuel door manual release cable. The customer may describe a loose cable hanging in the right rear of the cargo compartment
- 2015 -
Models from 2015
2015 JEEP RENEGADE |
NUMBER: GROUP: DATE: 23-020-15 REV. A Body July 08, 2015 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC. THIS BULLETIN SUPERSEDES SERVICE BULLETIN 23-020-15, DATED APRIL 09, 2015, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE A REVISED CLEAN DATE. THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL (RRT) 15-058. ALL APPLICABLE SOLD AND UN-SOLD RRT VIN's HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY. SUBJECT: Replace Missing Manual Release Cover For The Electric Fuel Door OVERVIEW: This bulletin involves installing a cover for the fuel door manual release cable. MODELS: 2015 (B1) Jeep Renegade (Latin America Vehicles Only) NOTE: **This bulletin applies to vehicles built on or before May 25, 2015 (MDH 0525XX).** SYMPTOM/CONDITION: The customer may describe a loose cable hanging in the right rear of the cargo compartment area. DIAGNOSIS: If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. For all other customers that describe the symptom/condition listed above, perform the Repair Procedure. PARTS REQUIRED: Qty. Part No. Description 1 735623051 Cover 23-020-15 REV. A -2- REPAIR PROCEDURE: 1. Open the rear hatch (Fig. 1). Fig. 1 Rear Hatch 2. If cover is not present and cable (1) is hanging perform the repair (Fig. 2). Fig. 2 Loose Cable 1 - Cable -3- 23-020-15 REV. A 3. Install the cable (2) onto the new cover (1) (Fig. 3). Fig. 3 Cable Insertion 1 - Cover 2 - Cable 4. Make sure the cable is fully inserted into the cover (1) as shown (Fig. 4). Fig. 4 Cable Fully Inserted Into Cover 1 - Cover 23-020-15 REV. A -4- 5. Install the cover and cable into trim cover as shown and turn the cover 90° counterclockwise until it’s completely locked into place (Fig. 5). Fig. 5 Installing Cover 6. Make sure the cover (1) is flush and installed properly (Fig. 6). Fig. 6 Cover Installed 1 - Cover -5- 23-020-15 REV. A POLICY: Reimbursable within the provisions of the warranty. TIME ALLOWANCE: Labor Operation No: 23-41-38-90 Description Install Release Cover for Manual Fuel Door (1 - Semi-Skilled) FAILURE CODE: ZZ Service Action Skill Category 6 - Electrical and Body Systems Amount 0.2 Hrs.