TT 80 13 01_ss3
Service Bulletin Details
Public Details for: TT 80 13 01_ss3
Updated to include an additional model for blower motor diagnosis.
- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 -
Models from 2017
2017 VOLKSWAGEN TIGUAN |
Models from 2016
2016 VOLKSWAGEN TIGUAN |
Models from 2015
2015 VOLKSWAGEN TIGUAN |
Models from 2014
2014 VOLKSWAGEN PASSAT |
2014 VOLKSWAGEN TIGUAN |
Models from 2013
2013 VOLKSWAGEN PASSAT |
2013 VOLKSWAGEN TIGUAN |
Models from 2012
2012 VOLKSWAGEN PASSAT |
2012 VOLKSWAGEN TIGUAN |
Models from 2011
2011 VOLKSWAGEN TIGUAN |
Models from 2010
2010 VOLKSWAGEN TIGUAN |
Models from 2009
2009 VOLKSWAGEN TIGUAN |
Models from 2008
2008 VOLKSWAGEN TIGUAN |
Technical Tips Technical Tip Topic 80-13-01TT – Blower Motor Fault Diagnosis Market area United States 444 Volkswagen of America, Inc. (6444) Brand Volkswagen Date October 5, 2018 Condition ATTENTION: THIS IS A TECH TIP, NOT A TECHNICAL BULLETIN. TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING. Blower Motor Fault Diagnosis Model(s) Year Eng. Code Trans. Code VIN Range From VIN Range To Passat 2012-2014 All All All All Tiguan 2008-2017 All All All All Technical Background If the vehicle comes in with a blower concern, check for DTCs. If DTCs are found, use the table below to diagnose the concern. Use figures 1 and 2 below for component reference. Service DTC and Fault Description B10BE07 – Overloaded or Blocked Motor B10BE96 - Four failure modes: current limit, open/short to batt (+), short or blocked motor, internal error Cause Blocked motor, fan blade separated from motor, fan blade rubbing housing, blower control module (J126) faulty, blower motor open circuit 1. Check physical condition of blower 2. Ensure 2-pin connector is making proper contact 3. Swap blower control module -J126- if available “Diag" wire is no longer able to send the digital (Square wave) back to the A/C control head. Check SC Fuse/power supply for loose pins or open Fuse: - Power & Ground wiring to (T6t) connector (in general) B10A115 - Diag circuit open/short to B+ - (T10a) connector soft set/not plugged in or loose terminal - (T6t) connector soft set/not plugged in or loose terminal 1 Technical Tips Figure 1 Figure 2 Additional Information Revision History Revision Number Released Date Reason For Update 2035296/4 10/5/18 Update to include an additional model. 2035296/3 7/19/17 Update to latest standard. 2035296/2 2/14/14 Update to information. 2035296/1 9/13/13 Original publication. © 2018 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. 2