650513
Service Bulletin Details
Public Details for: 650513
Basic svs: voice recognition inoperative after programming. After programming the vehicle with ista/p 2.48.X, the voice recognition (basic svs) is inoperative. Note: the basic svs only includes voice recognition for phone functions. Error
- 2014 - 2013 - 2012 - 2011 - 2010 -
Models from 2014
2014 BMW Z4 |
Models from 2012
2012 BMW 128I |
2012 BMW 135I |
2012 BMW 328I |
2012 BMW 328XI |
2012 BMW 335I |
2012 BMW M3 |
2012 BMW Z4 |
Models from 2011
Models from 2010
2010 BMW 128I |
2010 BMW 135I |
2010 BMW 328 |
2010 BMW 328I |
2010 BMW 328XI |
2010 BMW 335 |
2010 BMW 335D |
2010 BMW 335I |
2010 BMW 335XI |
2010 BMW M3 |
2010 BMW Z4 |
Page 1 of 2 SI B65 05 13 Audio, Navigation, Monitors, Alarms, SRS March 2013 Technical Service SUBJECT Basic SVS: Voice Recognition Inoperative After Programming MODEL E82 E88 E89 E90 E91 E92 E93 Produced from September 2010 to March 2013 with option 663 (Radio BMW Professional, RAD2+) and option 6NN (Hands-free Bluetooth) SITUATION After programming the vehicle with ISTA/P 2.48.x, the voice recognition (Basic SVS) is inoperative. NOTE: The Basic SVS only includes voice recognition for phone functions. CAUSE Error in the coding data of ISTA/P 2.48.x The voice recognition function is unintentionally deactivated. CORRECTION Do not replace parts. 1. Perform a vehicle test using the latest ISTA diagnostic software. Note: When the ISTA system message displays: “Battery voltage only “XX.XX” V. Please connect charger.” Please note the displayed battery voltage reading in the repair order comments section. 2. Reprogram the vehicle using ISTA/P 2.49.0 or later. New integration level: E89x-13-03-501 or higher 3. Complete all of the post-programming work as indicated in the ISTA/P Final Report. This includes performing diagnosis and clearing faults with ISTA, if necessary. http://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15236.1.B650513.x... 4/4/2013 Page 2 of 2 Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software. For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle Programming. WARRANTY INFORMATION Covered under the terms of the BMW New Vehicle/SAV Limited Warranty. Defect Code: 65 12 75 15 00 Labor Operation: Labor Allowance: Description: 00 00 006 Refer to KSD2 Performing “vehicle test” (with vehicle diagnosis system – checking faults) Refer to KSD2 Charging battery Refer to KSD2 Programming / encoding control unit(s) (not including CAS) Refer to KSD2 Programming / encoding control unit(s) (with CAS) and if necessary, also 61 21 528 and 61 00 710 or 61 00 720 Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead. Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of the last 7 digits of the Vehicle Identification Number (VIN). Click on the “Search” button, and then enter the applicable flat rate labor operation in the FR code field. If a control module fails to program correctly or initializations are required, the additional work must be claimed with separate labor operations under the defect code listed above; refer to KSD2. Other Repairs If performing other ISTA diagnostics and the related test plans results with eligible and covered work, claim this work with the applicable defect code and labor operations listed in KSD2. Note: Please follow any TeileClearing (TC) or Diagcode (DC) requirements that may apply to this additional work. [ Copyright ©2013 BMW of North America, Inc. ] http://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15236.1.B650513.x... 4/4/2013