PIC6245B

Bulletin No.: PIC6245B
Published date: 11/7/2018
Preliminary Information
PIC6245B TAC Part Restriction 2017-19 Accessory DC Power
Control Module (K1)
Models
Brand:
Chevrolet
Model:
Bolt EV
Model Years:
2017 - 2019
VIN:
from
SOP
Engine:
to
END
All
Transmissions:
All
Involved Region or
Country
North America
Condition
As part of our ongoing quality improvement process,
effective December 15th, 2016 the Accessory DC Power Control
Module (K1) Replacement is being placed on restriction through the
GM Technical Assistance Center (TAC).
Cause
Ongoing review by Engineering and TAC
Correction:
1) Please have a certified Bolt EV technician follow the procedures below prior to contacting
TAC.
IMPORTANT Note: Do NOT erase DTC's in any of the modules (Especially on intermittent
concerns) and do NOT attempt to reprogram software!
2) Please complete the following information below with as much information as possible
and as accurately as possible so that it can be e-mailed to TAC.
3) Check and record all diagnostic codes in all modules on the vehicle.
4) Be sure to record what module the DTC came from and any symptom codes associated
with the DTCs (see latest version of bulletin 10-07-30-002A for snapshot information).
5) Once the above information has been obtained, please review all P.I and TSB information
and all available S.I. diagnostics.
6) If diagnostics lead to a Accessory DC Power Control Module (K1) replacement, contact TAC
@ 877-446-8227
(U.S.) or in Canada 1-800-263-7740
(English) or 1-800-263-7960
(French) to review case details. Please have as much stored DTC and snapshot information
as possible prior to contacting TAC.
7) After reviewing the diagnosis, if component replacement is needed, TAC will arrange for
ordering of the new component and request that it be shipped overnight.
NOTE: After reviewing the diagnosis, if component replacement is needed, GM Technical
Assistance (TAC) will arrange for ordering of the part(s). When this occurs, record the last 8
of VIN # to be used by the parts department (in conjunction with the part #) as the CONTROL
NUMBER to track shipment of the part. It is not necessary to call TAC for part tracking
information.
Please follow this diagnostic or repair process thoroughly and complete each step. If the
condition exhibited is resolved without completing every step, the remaining steps do not
need to be performed.
Parts Information
Description
Part Number
QTY
Accessory DC Power Control Module (K1)
24288655
1
Warranty Information
Labor Operation
5010220
Description
Labor Time
Accessory DC Power Control Module
Use Published Labor
Replacement (K1)
Times
*This is a unique Labor Operation for Bulletin use only.
Version History
Version
Modi ed
2
01/09/2017 - Created on
10/19/2018 - Updated part number and add 2018-2019 model years
11/5/18 - Updated to clarify Model List
© 2018 General Motors. All Rights Reserved.