SC-2018070011
Service Bulletin Details
Public Details for: SC-2018070011
Check front left underbody, rework if necessary
Models from 2017
2017 MERCEDES-BENZ GLE |
Models from 2016
2016 MERCEDES-BENZ GLE |
Campaign No. 2018070011, August 2018 TO: ALL MERCEDES-BENZ CENTERS SUBJECT: MY17-18 GLE-Class (Model 166) and GLE-Coupe (Model 292) Check Front Left Underbody, Rework if Necessary Daimler AG (“DAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY1718 GLE-Class and GLE-Coupe vehicles, the front left underbody may not meet current production specifications. An authorized Mercedes-Benz dealer will check the front left underbody and rework it if necessary. Prior to performing this Service Campaign: • Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired. • Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described. Approximately 1246 vehicles are affected. Order No. P-SC-2018070011 This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSA-SLP S424HH001, Control of Quality Records. 2 Check Procedure 1. Check front left underbody for cracks. There must be no cracks in the underbody (A, figure 2). a. If there is a crack: Carry out work procedure. b. If there are no cracks: End measure. Figure 1 (shown on model 166) Figure 2 (with visible crack, not ok) The findings from the check procedure must be recorded on the workorder. P-SC-2018070011 3 Work Procedure 1. Remove cross-member (1, figure 1). For basic data for model 166, see AR22.10-P-1180GQ. For basic data for model 292, see AR22.10-P-4360OGR. 2. Drill out to the left and to the right of the crack using a twist drill bit (3 mm) (figure 3). Note: The sheet metal is double-layered in this area. Do not drill deeply. Drill no more than 1 mm deep. Do not drill through the sheet metal. Figure 3 (with visible crack, not ok) 3. Seal repair area using body sealant (A 002 989 63 98). 4. Apply cavity preservation agent to the reworked area. 5. Reattach cross-member. P-SC-2018070011 4 Primary Parts Information Qty. Part Name Part Number As required* Seam seal As required* Preservation agent *1 container is to be used for approx. 25 vehicles. A 002 989 63 98 A 000 986 72 70 10 Estimated Replacement Rate 5% 5% Warranty Information With check Operation: Check left underbody (02-2386) Damage Code 61 902 33 8 Operation Number 02-2386 Labor Time (hrs.) 0.2 h With check and repair Operation: Check left underbody (02-2386) Rework left underbody (after check) (02-2387) Damage Code 61 902 33 7 Operation Number 02-2386 02-2387 Note Operation Number labor times are subject to change. P-SC-2018070011 Labor Time (hrs.) 0.2 h 0.9 h