A901806 2052820-
Service Bulletin Details
Public Details for: A901806 2052820-
This bulletin contains a software update that addresses the issue for when the map is visible within the speedometer.
Models from 2018
| 2018 AUDI A3 |
| 2018 AUDI A3 CABRIOLET |
| 2018 AUDI A4 |
| 2018 AUDI A4 ALLROAD |
| 2018 AUDI A5 |
| 2018 AUDI Q5 |
| 2018 AUDI Q7 |
Models from 2017
| 2017 AUDI A3 |
| 2017 AUDI A3 CABRIOLET |
| 2017 AUDI A4 |
| 2017 AUDI A4 ALLROAD |
| 2017 AUDI Q7 |
| 2017 AUDI R8 |
| 2017 AUDI R8 SPYDER |
| 2017 AUDI TT |
| 2017 AUDI TT ROADSTER |
90 Audi virtual cockpit map section displayed inside the speedometer 90 18 06 2052820/1 November 1, 2018. Model(s) Year VIN Range Vehicle-Specific Equipment A5, Q5 2018 All With Audi virtual cockpit 000001 – 015322 TT and 2017 With Audi virtual cockpit 900001 - 915322 Q7 2017 000001 – 045840 With Audi virtual cockpit Q7 2018 All With Audi virtual cockpit R8 2017 900001 - 904541 With Audi virtual cockpit A4, A3 2017 – 2018 All With Audi virtual cockpit Condition Customer states: The map is visible within the speedometer when the large tubes are displayed. Figure 1. Map is visible within the speedometer. Technical Background The software needs to be updated. The optimized software will fix the map display algorithm. Page 1 of 4 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Production Solution New software in the instrument cluster control module, J285 (address word 0017) addressed the condition. Service SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions, TSB 2047812: 00 SD Creator: How to setup and use the SD Creator for obtaining vehicle software updates via the MirrorServer, and TSB 2047576: 91 MIB2 High Navigation Software Update Instructions (PR Code 7UG). 2. Update the instrument cluster control module, J285 (address word 0017) using the SVM action code as listed in the table below, if necessary: Model Model Year Old Software Part Number Old Software Version New Software Part Number New Software Version SVM Code Input (or higher) 2017 0300 4M0920890B Q7 R8 0302 4M0920890B 0310 FPKWW310Q7 0306 2018 4M0920890E 0376 4M0920890E 0378 FPKWW378Q7 2017 4S0920890A * 4S0920790A 0253 FPKWW253R8 2017 8W5920890C * 8W5920890C 0313 FPKWW313B9 2018 8W5920890G 0377 8W5920890G 0379 FPKWW379B9 2017 8V0920890 0047 FPKWW047A3Q2 0069 FPKWW069A3Q2 0296 FPKWW296TT A4/A5/Q5 8V0920894 8V0920890 * 8V0920894 A3 2018 8V0920890C 8V0920894C TT 2017 8S0920790B 0068 * 8V0920890C 8V0920894C 8S0920790B Page 2 of 4 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Warranty 110 up to 48 Months/50,000 Miles. Claim Type: G10 for CPO Covered Vehicles – Verify Owner. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 9025 Damage Code: 0039 Labor Operations: Software Update 0151 0000 Time stated on diagnostic protocol (Max 100 TU) Diagnostic Time: GFF No allowance 0 TU Road test prior to service procedure No allowance 0 TU Road test after service procedure No allowance 0 TU Claim Comment: As per TSB #2052820/1 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools If necessary order in advance the SD card for the model or install the software to an SD card with the specifications SDHC or SDXC via the SD Creator: Model Model year SD card Q7 2017 8S0906961AJ 2018 8S0906961AK R8 2017 8S0906961AF A4/A5/Q5 2017 8S0906961AG 2018 8S0906961AL 2017 8S0906961AH A3 Page 3 of 4 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. TT 2018 8S0906961AM 2017 8S0906961AE Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: TSB 2011732, 00 Software Version Management (SVM), operating instructions. TSB 2047812, 00 SD Creator: How to setup and use the SD Creator for obtaining vehicle software updates via the MirrorServer. TSB 2047576, 91 MIB2 High Navigation Software Update Instructions (PR Code 7UG). All part and service references provided in this TSB (2052820) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Page 4 of 4 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.