LI4700N069277
Service Bulletin Details
Public Details for: LI4700N069277
Engine running complaints - fault code P062700 current and/or stored in fscu (n118)
- 2008 - 2007 - 2006 - 2005 - 2004 - 2003 -
Models from 2008
2008 SPRINTER 2500 |
2008 SPRINTER 3500 |
Models from 2007
2007 SPRINTER 2500 |
2007 SPRINTER 3500 |
Models from 2006
2006 SPRINTER 2500 |
2006 SPRINTER 3500 |
Models from 2005
2005 SPRINTER 2500 |
2005 SPRINTER 3500 |
Models from 2004
2004 SPRINTER 2500 |
2004 SPRINTER 3500 |
Models from 2003
2003 SPRINTER 2500 |
2003 SPRINTER 3500 |
Engine running complaints - Fault code P062700 current and/or stored in FSCU (N118) Topic number LI47.00-N-069277 Version 1 Function group 47.00 General Date 01-30-2019 Validity Metris (447) Reason for change Reason for block Complaint: Engine cannot be started or engine running complaints with Fault Code P062700 current and/or stored in FSCU (N118) Cause: Various Remedy: -Perform guided test for fault code P062700 in FSCU and perform repairs based on results. If guided test does not provide specific remedy: 1-Inspect the following and repair as necessary: -Sockets 3,4,5 and 6 at FSCU(N118) connector 1 for loose tension or incorrect crimping. -Visible area of wiring between FSCU(N118) and fuel pump(M3/6) for damage. -Sockets 5,7,9 and 13 at fuel pump(M3/6) for loose tension or incorrect crimping. 2-If all checks performed above are OK: -Replace sockets 3,4,5 and 6 at FSCU(N118) connector 1. -Replace sockets 5,7,9 and 13 at fuel pump(M3/6). -Check for and install SW update for FSCU(N118). 3-If fault returns after above procedure create a PTSS. Include the following: -Initial quick test -Control unit log of FSCU -Description of driving scenario where fault occurs 01-30-2019 6:57 PM © Copyright Daimler AG CBUTCHE Page 1/2 -Previous repairs performed Symptoms Power generation / Engine management / Engine running / Stalls/goes out Power generation / Engine management / Engine running / Cuts out intermittently Power generation / Engine management / Indicator lamp / Engine diagnosis / lit Power generation / Engine management / Engine start/stop / Long starting time Power generation / Engine management / Engine start/stop / Does not start Control unit/fault code Control unit Fault code N118 - Control unit 'Fuel pump' P062700 FSCM_GEN4 Fault text The output for the fuel pump has an electrical fault or open circuit. _ Parts Part number ES1 ES2 Designation Quantity Note EPC A 013 545 14 26 SLK2.8 Contact 0.5mm² 1 If needed, for FSCU connector X A 013 545 16 26 SLK2.8 Contact 1.5mm² 3 If needed, for FSCU connector X A 021 545 13 26 MCP1.2 ELA Contact 0.5mm² 1 If needed. for fuel pump connector X A 009 545 82 26 SLK2.8 ELA Contact 1.5mm² 3 If needed, for fuel pump connector X A 000 545 76 80 Single wire seal for SLK2.8 ELA Contact 3 If needed, for fuel pump connector X A 000 545 69 80 Single wire seal for MCP1.2 ELA Contact 1 If needed, for fuel pump connector X W22058901992 5 Release tool for MCP1.2 Con- 1 tact Special tool W22058901996 3 Release tool for SLK2.8 1 Special tool W22058901995 0 Blade holder for SLK2.8 relea- 1 se tool Special tool W22058904991 0 Crimping set MCP 1.2 ELA 1 Special tool W22058901990 9 Crimping set SLK 2.8 ELA 1 Special tool W22058901990 7 Crimping set SLK2.8 1 Special tool Validity Vehicle Engine Transmission Vito/Metris 447 * * 01-30-2019 6:57 PM © Copyright Daimler AG CBUTCHE Page 2/2