K52765591

Service Bulletin Details

Public Details for: K52765591

Fault code spn 1056 fmi 2, bendix blink (flash) code 20-12 trailer pmv hold function; abs and tcs lights illuminated


- 9999 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -

Models from 2019
2019 VOLVO VNX
Models from 2018
2018 VOLVO VNX
Models from 2017
2017 VOLVO VNX
Models from 2016
2016 VOLVO VNX
Models from 2015
2015 VOLVO VNX
Models from 2014
2014 VOLVO VNX
Models from 2013
2013 VOLVO VNX
Solution K52765591
Tuesday, March 5, 2019 5:06:25 PM CET
Mack Models
LEU , LR , MRU - TerraPro , TE - TerraPro , AN - Anthem , CHU - Pinnacle, Axle
Mack Model
back , CXU - Pinnacle, Axle front , GR - Granite , GU - Granite , PI - Pinnacle , TD Titan
Volvo Models
VNL , VNM , VNR , VNX , VAH
Volvo Model
** SOLUTION **
Title
Fault Code SPN 1056 FMI 2, Bendix Blink (Flash) Code 20-12 Trailer PMV Hold
Function; ABS And TCS Lights Illuminated
A vehicle may present with ABS and TCS lights illuminated and SPN 1056 FMI 2
Cause
logged on a DTC Readout. Bendix Blink Code 20-12 will accompany this fault.
It has been found that this condition can be caused by two reversed air lines at the trailer
ABS module.
Solution
Diagnosis
With a gauge connected inline at port FT1 of the TPV, full air pressure and a flutter between the TPV
deactivation and Trailer PMV activation will be observed. On a proper functioning unit, about 35psi of
steady air pressure was recorded (no flutter).
The TPV air line should be coming from port 22 of the ABS trailer module as shown in the diagram
below. It was found to be routed to port 21 on units with this symptom. The blue arrows show the two
ports that may be reversed.
In the cases described above, the TPV air line was found to be connected to port 21.
Repair
Swap the air lines between ports 21 and 22. Recheck the function.
Internal comments (BO)
Refer to SR # 1-8821303991 for more details.
Solution visibility
Dealer distribution
Function(s)/component(s) affected
Function affected
braking/auxiliary pneumatic circuits
Function Group
Function Group
5 brake
Customer effect
Main customer effect
fault code/display
Fault code(s)
US10 Fault Codes
SPN 1056 FMI 2
Administration
Author
RU3011V
Dealer ID
RU4469V
Last modified by
RU4469V
Creation date
02-10-2018 17:10
Date of last update
14-02-2019 18:02
Status
Published


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.