LI54 25-N-061756

ESP indicator lamp active, fault code C007500 in ESP control unit
Topic number
LI54.25-N-061756
Version
2
Design group
54.25 Switches
Date
06-09-2017
Validity
MODEL 906 with CODE BB9 (Electronic Stability Program (ESP9i))
Reason for change
Distribution revised
Reason for block
Complaint:
ESP indicator lamp active, fault code C007500 in ESP control unit.
Cause:
The brake light switch may been overloaded and damaged internally.
Remedy:
Replace brake light switch and install adapter wiring harness (see AR42.10-D-0042SG).
Note: The adapter wiring harness must be fastened in the area of the brake light switch so that it cannot chafe or
touch components of the steering system.
Symptoms
Chassis/suspension / Brake system / Service brake / Indicator lamp / Brake indicator light / lit
Chassis/suspension / Brake system / Service brake / Display message / Goes on
Control unit/fault code
Control unit
Fault code
Fault text
ESPElectronic stability program (ESP9CEI)
C007500
The cables from control module N30/4 (Electronic Stability Program (ESP)) to component S9/3 (Electronic brake light switch)
have Short circuit or open circuit.
Parts
Part number
ES1 ES2 Designation
Quantity Note
A 001 545 63 09
Brake light switch
1
A 906 546 02 00
Adapter wiring harness
1
06-09-2017 5:39 PM
© Copyright Daimler AG
PUCKETL
EPC
X
Observe fastening
X
Page 1/2
Operation numbers/damage codes
Op. no.
Operation text
Time
54-1011
PERFORM QUICK TEST
54-2710
REPLACE BRAKE LIGHT SWITCH
Damage
code
Note
54311 73
Brake light switch - Electrical fault
The listed damage code is not to
be considered as an acceptance of
costs. The general guidelines in the
Warranty Manual apply.
WIS-References
Document number
Title
Note
AR42.10-D-0042SG
Remove/install brake light
switch
Allocation
Remedy
Validity
Vehicle
Engine
Transmission
Sprinter III
642
722
Sprinter III
642
711
Sprinter III
651
711
Sprinter III
651
722
06-09-2017 5:39 PM
© Copyright Daimler AG
PUCKETL
Page 2/2