19-GI-002H

GROUP
GENERAL
INFORMATION
Technical Service Bulletin
DATE
MARCH, 2019
SUBJECT:
NUMBER
19-GI-002H
MODEL(S)
ALL
LABEL REQUIREMENTS FOR VEHICLE
LOADING TO COMPLY WITH FMVSS 110
Description: This TSB supersedes TSB 13-GI-001 and has been updated to describe the new
website available on HMAService.com designed to assist dealers with proper application of the “Load
Carrying Capacity Reduced” label.
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) set a threshold for
correcting load capacity information indicated on tire placards when the vehicle weight has been
increased before retail sale. This limit is the lesser of 1.5% of the Gross Vehicle Weight Rating or
45.4kg (100 pounds). If the total added weight exceeds the lesser of the limit, a label (See Figure 1)
must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
Applicable Vehicles: All vehicles retailed beginning on June 2, 2008 that meet the additional weight
criteria above.
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
LABEL REQUIREMENTS FOR VEHICLE LOADING TO COMPLY WITH FMVSS110
Parts Information:
Part Name
Load Carrying Capacity Reduced Label
Label Part Number
NP070-09003
Qty.
1
Service Procedure:
All Dealers must determine if the weight they have added in the form of a single or multiple option(s)
or accessory(s), when added to the weight of any Port installed option(s) or accessory(s), exceeds
the lesser of 1.5% of GVWR or 45.4kg (100 lbs). All Port installed or Dealer installed options must be
included in the weight analysis. If the additional weight does exceed the lesser of the indicated
thresholds, a 'Load Carrying Capacity Reduced” Label must be installed. A black, fine point, indelible
marker must be used to write by hand onto the label the reduced carrying capacity in kilograms and
pounds, which is the total weight of all the added option(s) or accessory(s).
Example:
Vehicle
Year: 2018
Model: Santa Fe
Trim: Limited
Option: FWD
GVWR
5,512 lbs
Port Installed
Dealer Installed
Accessory Weight Accessory Weight
24 kg
(53 lbs)
15 kg
(33 lbs)
Total Accessory
Weight
1.5% of
GVWR
39 kg
(86 lbs)
38 kg
(84 lbs)
The added accessories weigh 39kg (86 lbs) and exceed the listed 1.5% (GVWR) threshold
of 38kg (84 lbs). Therefore, a “Load Carrying Capacity Reduced” Label must be added with
a value of 39kg (86 lbs) written with a black, fine point indelible marker. The label must be
applied within 25mm (1 inch) of the existing tire placard.
TSB #: 19-GI-002H
Page 2 of 4
SUBJECT:
SUBJECT:
1.
LABEL REQUIREMENTS FOR VEHICLE LOADING TO COMPLY WITH FMVSS110
To determine if a “Load Carrying Capacity
Reduced” label is required go to the
following website: HyundaiTechInfo.com.
On the left side of the screen you will find a
link to the “Accessory Part Weight
Calculation” worksheet.
Selecting this link will initiate a download of
the “Part Accessory Weight Calculation”
Excel worksheet.
2.
The downloaded sheet has an automated calculation that will determine if the vehicle
requires the “Load Carrying Capacity Reduced” Label. It will also indicate the weight to be
recorded on the label.
Example: Label Required (write both 115lbs and 52.2kg on the label)
Example: Label NOT Required
3.
Step 1: Enter GVWR
From the provided table select subject
vehicle (Model, Year, Trim). Enter the weight
below the cell labeled “Select your Model
and record in the GVWR box BELOW (lbs.)”.
 NOTE
If the subject vehicle is not listed refer to
the VIN placard on the vehicle B-Pillar.
Record the GVWR weight rating.
TSB #: 19-GI-002H
Page 3 of 4
SUBJECT:
LABEL REQUIREMENTS FOR VEHICLE LOADING TO COMPLY WITH FMVSS110
SUBJECT:
4.
Step 2: Entering Accessory Weights

Enter Port Installed Accessory Weight
from the Monroney Label

From the table provided add all
applicable Dealer Installed Accessories.
The Accessory weight is also indicated
in the installation instructions.

Enter the weight below the cell labeled
“Applicable Dealer Installed
Accessories (lbs.).
 NOTE
When Dealers add accessory(s) or option(s) before retail sale, Dealers are required
to add the weights of Port installed accessory(s) listed on the Monroney Label to the
weights of accessories added at the Dealer. The total weight of port installed
accessories will be printed in the box containing the VIN and Engine # in the lower
portion of the Monroney Label. Dealers must add the listed accessory weight
to the weights of any Dealer installed accessory(s) or option(s) to determine the total
accessory weight. If a label was already applied at the Ports containing a reduced
load carrying capacity, the Dealer may need to apply a new label to take into account
additional option(s) or accessory(s) added by the Dealer.
5.
The worksheet will indicate if a “Load
Carrying Capacity Reduced” label is
required. If the label is required the
worksheet will indicate the weight that must
be written on the label.
6.
Label must be added with the indicated
weight in lbs. written with a black, fine point
indelible marker. The label must be applied
within 25mm (1 inch) of the existing tire
placard.
Example
Example:
TSB #: 19-GI-002H
Page 4 of 4
SUBJECT: