2053347-1

Field campaign
Topic
Market area
Brand
Transaction No.
Campaign number
Note
Type
US code
Front camera parameters (SC19/04)
Bentley: worldwide (2WBE),Hongkong-Macau (5HK)
Bentley
2053347/1
EB18
Vehicle data
Bentayga
Sales types
Type MY Brand Designation Engine code Gearbox code Final drive code
4V1* 2017 E
4V1* 2018 E
*
*
*
*
*
*
Chasssis numbers
Manufacturer Filler Type Filler MY Factory From To
Prod from Prod to
SJA
*
*
*
*
*
011118 019500
Documents
Document name
master.xml
EB18
Front camera parameters (SC19/04)
Transaction No.: 2053347/1
Notes
Repair instructions
Technical background
On a limited number of Bentayga vehicles, the heating parameters for the front camera may have been set incorrectly.
Remedy
On all affected vehicles the front camera control unit must have new heating parameters set.
Customer notification
Customers do not need to be informed directly of this campaign. Please ensure that all affected vehicles are checked and repaired during a service
visit. You should also inform your new and used car sales departments so that the vehicles affected can be checked, and if necessary repaired
immediately and not just prior to sale.
Warranty accounting instructions
Warranty type
710 or 790
Labour operation code
01 29 00 04
Damage Service Number
EB18
Damage code
00 66
Time
40 TU
Criteria ID
01
Genuine parts
Not applicable.
Parts supply
Not applicable.
Parts despatch control
Not applicable.
Repair instructions
Notes
Technical background
On a limited number of Bentayga vehicles, the heating parameters for the front camera may have been set incorrectly.
Check
If the vehicle is not already listed as repaired in the ‘Repair history’ section of ElsaPro, check for the presence of the campaign identification mark as
shown in the ‘Identification’ section of this document. In the event that the campaign has not been applied, please carry out the required work in
accordance with these instructions.
Genuine parts
Not applicable.
Work
The ODIS Brand version must be running at a minimum of 2.25.5, if not then update your ODIS program to the latest available
version.
IMPORTANT: Check the current version of ODIS on your VAS tester. Select the Information menu on the ODIS home screen and check the Brand
version (highlighted below).
If the Brand version is 2.25.5 a Hotfix is required to be installed on the tester before carrying out the repair, follow the Installing Hotfix section of this
document.
If the Brand version is 2.25.6 or higher a Hotfix is not required, proceed straight to the Parameter settings section of this document.
Installing Hotfix
The Following Hotfix is available for Brand version 2.25.5 only.
Download the hotfix ‘E_2.25.5_Bentley_2.25.5_BY636_R242_updated_GSF_V1_20190306-100916.zip’ from Bentley Hub onto a USB memory stick
and then copy it onto the Desktop of the VAS tester. Make sure ODIS is not running, if it is close it down.
Extract the zip file onto the desktop of your VAS tester – it will create a folder containing multiple files.
Start ODIS as normal. From the ODIS homepage click the ‘Data’ menu option then scroll down to ‘Hotfix’ and select ‘Get’.
Navigate to the following folder that was created on your desktop and select the file.
The following message should appear:
Now continue with the Parameter settings section of this document.
Parameter settings
•
The closed-circuit voltage of the vehicle must be at least 12.5 V during the update. Connect the battery of the vehicle to an
external power supply. For further information see the maintenance manual or the repair manual.
•
Because of the highest transmission stability we recommend the use of the diagnosis interface VAS 6154 (WiFi diagnostic tool)
only in the USB operation or the cable-connected VAS 5055 for the reprogramming (updating) of control units. If these units
are not available, the diagnosis interface VAS 5054 (A) can also be used in USB mode.
1. Select and run Guided fault finding. Within the Special functions tab select SVM – Problem related Hardware/Software update, then select Perform
test (Figure 1).
Figure 1
2. On the next screen enter the SVM code 4V0A5ZDC01 and select Adopt (Figure 2). On the following screen confirm code is correct.
Figure 2
3. Follow on screen prompts until the screen below is displayed (Figure 3), select Done/Continue, the parameters of the front camera willnow be set.
Figure 3
4. Continue to follow all on screen prompts until the message ‘Vehicle conversion/update successfully completed’ appears (Figure 4). Select
Done/Continue, the test will then be ended.
Figure 4
IMPORTANT: The following action must be completed.
Click the Select own test option then navigate to;
A5 – Front camera for driver assist systems – R242 → A5 - Subsystems, marginal conditions → R242 – Front camera heater
parameter adaption
Select and attach to test plan (Figure 5).
Figure 5
Now select and run the test, the heating parameters for the front camera will be adjusted. Ensure the new values in the ‘Actual value after adaption’
column are stored exactly as below (Figure 6).
Figure 6
Identification
On completion apply a GREEN paint campaign completion mark to the inside of the battery positive post cover. The presence of the GREEN dot
confirms campaign completion.
Repair instructions
Notes