PIP4017C
Service Bulletin Details
Public Details for: PIP4017C
This prelimary information informs the dealer of a potential fuel injector concern that could set diagnostic trouble code P1174. The dealer is instructed to test the fuel injectors with the active fuel injector testing tool to determine if
Models from 2007
2007 CHEVROLET MALIBU |
2007 PONTIAC SOLSTICE |
2007 SATURN AURA |
2007 SATURN SKY |
2007 SATURN VUE |
Bulletin No.: PIP4017C Published date: 05/13/2019 Preliminary Information PIP4017C SES Light due to a P1174 DTC - Perform Injector Test with AFIT (CH47976) Models Brand: Model: Model Years: VIN: from to Engine: Transmissions: Chevrolet Malibu 2006 - 2007 All All 2.4 LE5 All Pontiac G6 2006 All All 2.4 LE5 All Pontiac Solstice 2006 - 2007 All All 2.4 LE5 All Saturn Aura 2007 All All 2.4 LE5 All Saturn Sky 2007 All All 2.4 LE5 All Saturn Vue 2007 All All 2.4 LAT All Supersession Statement This PI was superseded to update Recommendations/Instructions. Please discard PIP4017B The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition / Concern On rare occasions, a SES light may be encountered due to a P1174 DTC. In some instances, a P0300 may also be stored. This may be due to a fuel injector concern on one of the cylinders that a Tech 2 fuel injector balance test may not isolate. Recommendations / Instructions If the SI diagnostics do not isolate a cause for this concern, perform the Fuel Injector Diagnosis (w/CH47976) in SI. If a lean injector is found, replace it and re-evaluate the concern. In some instances, a fuel injector that has a flow rate as little as 3% less than the other 3 injectors could cause this DTC to set. Also, as mentioned in the P1174 SI diagnosis, if the misfire current counters or misfire graph indicate any misfires, it may be an indicator of the cylinder that is causing the concern. Notice: As mentioned in the AFIT User Guide, vehicles that are not listed in the AFIT menu can still be tested with the AFIT. If the model you are working on is not in the AFIT menu, ensure that the AFIT has been updated with the latest software. To find the latest AFIT software, follow instructions in the latest version of PIP4723 to gain access to GM tools and equipment website. If the latest AFIT software has been installed but the vehicle you are working on still is not listed in the AFIT menu, it will be necessary to use the direct connection method outlined in the AFIT User Guide. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. © 2019 General Motors. All Rights Reserved.