A9019182055028_2
Service Bulletin Details
Public Details for: A9019182055028_2
This bulletin contains a software update for dtc B200041.
Models from 2018
2018 AUDI A3 |
2018 AUDI A3 CABRIOLET |
Models from 2017
2017 AUDI A3 |
2017 AUDI A3 CABRIOLET |
90 DTC B200041 stored in the instrument cluster control module 90 19 18 2055028/2 June 5, 2019. Supersedes Technical Service Bulletin Group 90 number 19-16 dated May 15, 2019 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A3 2017 - 2018 All Instrument cluster with color display Condition REVISION HISTORY Revision Date Purpose 2 - Revised header (Expanded VIN range) 1 05/15/2019 Initial publication Customer states: No customer concerns, it is found during PDI or any other diagnostic work. Workshop findings: The following DTC may be stored instrument cluster control module, J285 (address word 0017): DTC B200041 (control unit faulty, static). Technical Background The diagnostics are too sensitive. Production Solution New software in the instrument cluster control module, J285 (address word 0017) addressed the condition. Service 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the instrument cluster control module, J285 (address word 0017) using the SVM action code as listed in the table below, if necessary, following the additional instructions stated below: Page 1 of 4 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. A vehicle without Audi advanced key (PR Code 4I2): 1. No special procedure required. A vehicle with Audi advanced key (PR Code 4I3): 1. Before starting the update the steering column should be fully extended. This allows full access to the key reader coil on the right side of the steering column. The ignition key must be held or temporarily taped to the key reader coil during the update. 2. Start the update on the workshop tester by selecting update and entering the specified SVM code. 3. If the message "…hold the vehicle key on the transponder…" appears, hold the vehicle key as shown in Figure 1 on the provided recess of the steering column. Once the update starts in the Audi virtual cockpit keep the holding key in this position until the update is completed. Figure 1. Center console with a mark for the vehicle key. Model A3 (2017) Old Software Part Number New Software Part Number 8V0920872* 8V0920972* 8V0920972* 8V0920973* * New Software Version SVM Code Input (or higher) 8V0920872* 8V0920873* A3 (2018) Old Software Version 8319 8V0920873* 8V0920973* 8V0920874* 8V0920874* 8V0920974* 8V0920974* 17A027 0313 Page 2 of 4 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. 8V0920961* 8V0920961* 8V0920861* 8V0920861* Warranty Claim Type: 110 up to 48 Months/50,000 Miles. G10 for CPO Covered Vehicles – Verify Owner. If the vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 9025 Damage Code: 0039 Labor Operations: Software Update 0151 0000 Time stated on the diagnostic protocol (Max 100 TU) Diagnostic Time: GFF No allowance 0 TU Road test prior to the service procedure No allowance 0 TU Road test after the service procedure No allowance 0 TU Claim Comment: As per TSB #2055028/2 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: TSB 2011732, 00 Software Version Management (SVM), operating instructions. All part and service references provided in this TSB (205028) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2019 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes Page 3 of 4 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Page 4 of 4 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.