K42065042

Service Bulletin Details

Public Details for: K42065042

Engine preheat icon does not illuminate in the instrument cluster (ic) during engine pre-heat (intake air heater) operation - post-facelift vehicles, model year 2018 and newer


- 9999 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -

Models from 2020
2020 VOLVO VNX
Models from 2019
2019 VOLVO VNX
Models from 2018
2018 VOLVO VNX
Models from 2017
2017 VOLVO VNX
Models from 2016
2016 VOLVO VNX
Models from 2015
2015 VOLVO VNX
Models from 2014
2014 VOLVO VNX
Models from 2013
2013 VOLVO VNX
Solution K42065042
Monday, June 3, 2019 7:06:16 PM CEST
** SOLUTION **
Title
Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine
Pre-heat (Intake Air Heater) Operation - Post-Facelift Vehicles, Model Year 2018 And
Newer
Mack Models
Mack Model
AN - Anthem , CHU - Pinnacle, Axle back , CXU - Pinnacle, Axle front , GR - Granite
, GU - Granite , PI - Pinnacle
Volvo Models
Volvo Model
VNL , VNM , VNR , VNX , VAH , VHD
Engine family
Engine family
11L Engine , 13L Engine , MP7 , MP8
** SOLUTION **
Cause
In post-facelift trucks the Preheat Icon may not illuminate during engine
preheat operation, providing no indication to the driver that the function is active.
The icon may not illuminate due to a parameter missing from the Instrument Cluster (IC)
module.
Solution
If the Preheat Icon does not illuminate while Engine Preheat is active as shown
below:
A. Update Instrument Cluster Software (SW) to enable the parameter.
1. In Premium Tech Tool (PTT), run Operation 1700-22-03-06 Accessory Kit.
The operation can be found under the Program tab.
2. When prompted, enter Accessory Kit Number 85153771.
3. Press the Program button in the lower right-hand corner of the screen.
4. Allow the programming operation to complete.
B. Set Vehicle (System) Date And Time.
1. Run PTT Operation 1700-22-03-02 System Date and Time. The operation can
be found under the Program tab.
2. More information can be found in CBR Solution K11533602.
Solution visibility
Dealer distribution
Function(s)/component(s) affected
Function affected
18 1 0 IC , MID 140 – IC04 / IC05 , Intake pre-heater
Function Group
Function Group
381 combined instrument
Customer effect
Main customer effect
calibration/programming/pairing/missing operation , visual appearance
Visual appearance
part lost/missing function
Conditions
Vehicle operating mode
Frequency of occurrence of
problem
Engine temperature
when activating
always
cold
Administration
Author
A241298
Dealer ID
A241298
Last modified by
RU4469V
Creation date
24-07-2018 16:07
Date of last update
28-05-2019 17:05
Status
Published


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.