SPJ3224230-2019-

VOLVO CAR
SERVICE AND PARTS BUSINESS
Service Product Journal
TITLE:
Digital Head Light Instrument for L.E.D., Halogen, Xenon vehicles
REF NO:
ISSUING DEPARTMENT:
REFERENCE BULLETINS:
CATEGORY:
SUBCATEGORY:
CAR MARKET:
Information Products
Wiring Diagrams
United States and Canada
32242.3.0
Service Personnel:
Read and initial
SERVICE
MANAGER
SERVICE
WRITER
WARRANTY
ADMINISTRATOR
ISSUE DATE:
STATUS DATE:
2019-05-08
2019-05-13
Page 1 of 3
“Right first time in Time”
Attachment
File Name
A1.pdf
File Size
0.1125 MB
Background:
To check and adjust head lights on vehicles with LED-light.
A light measurement/adjustment tool shall be equipped with:
•
•
•
•
•
•
•
•
Camera on board, capable of measuring all headlamp variants.
Headlamp variants to be measured: Halogen, Xenon and LED, regardless of optical solution
(reflector or lens).
Functions to be measured: Low beam, high beam, and fog light with an accuracy of at least +/-0,1 %
on vertical deviation and at least +/- 0,4% on horizontal deviation.
Beam Pattern: cover applicable market and legal requirement (symmetrical, asymmetrical, left/right
hand driving)
Optical box Laser pointer to ensure a correct position in front of the center of the beam.
Laser visor to ensure the tool is positioned parallel to the vehicle for the working length.
Height sensor (optional)
*Slope sensor, for compensation of the floor inclination +/- 0,6° maximum slope of the
recommended working area.
Produced in the USA and available as an electronic document. Hard copy documents are printed in USA on recycled paper containing
a minimum of 50% wastepaper and 10% post-consumer waste.
© 2019 VOLVO CAR USA, LLC
Service Product Journal 32242.3.0
•
•
•
•
Support for PC connectivity.
Possibility to print out values.
Equipment shall be approved according to SAE J599 and J600.
Equipment shall provide a mean for compensating inclination of the floor where the vehicle is
positioned.
*= Automatic floor level setting of the instrument.
Requirements on the surface, which the vehicle stands during light measurement.
A1) With Automatic slope function= Area dedicated to the digital headlight equipment,
see below graph/image showing maximum allowed floor inclination.
Recommendations
To fulfil the requirements on the floor inclination it is recommended to use a four post lift or four
wheel alignment bay since these equipments already are accurately leveled and fulfills the inclination
requirement.
To view SPJ attachment continue to next page. This SPJ has one attachment.
Page 2 of 3
2019-05-13
Service Product Journal 32242.3.0
2019-05-13
Page 3 of 3