A9019272056015_1

Service Bulletin Details

Public Details for: A9019272056015_1

This bulletin contains instructions for dtc B170Af1 or dtc B200Ff3.


- 2020 - 2019 -

90 DTC B170AF1 or B200FF3 stored in the control module for driver assist systems after a software
update
90 19 27 2056015/1 August 30, 2019.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A6, A7, A8,
and Q8
2019 – 2020
All
Not Applicable
Condition
Customer states:
No customer concerns, it is found during PDI or any other diagnostic work.
Workshop findings:
After a software update for the control module for driver assist systems, J1121 (address word 00A5) one of the
following DTCs is stored:
 DTC B170AF1 (Coding Step 2 not carried out) static with symptom code 2117696.
Or
 DTC B200FF3 (Internal malfunction static) with symptom code 221193.
Technical Background
Not applicable.
Production Solution
Not applicable.
Service
1. Execute the test plan "Check control unit configuration" and "Replace control unit" without replacing the
control modules.
2. The DTCs can be cleared afterward.
Page 1 of 2
© 2019 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Warranty
Claim Type:
 110 up to 48 Months/50,000 Miles.
 G10 for CPO Covered Vehicles – Verify Owner.
 If the vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
9093
Damage Code:
0039
Diagnostic Time:
GFF
0150 0000
Time stated on
the diagnostic
protocol (Max 50
TU)
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
No allowance
0 TU
Claim Comment:
As per TSB # 2056015/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All part and service references provided in this TSB (2056015) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2019 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Page 2 of 2
© 2019 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.