PIP5672
Service Bulletin Details
Public Details for: PIP5672
This preliminary information communicates to the dealer technician to replace the transmissionauxiliary fluid pump if codeP2797 is the only codeset in the tcm of the vt-40 cvt automatic transmission along with a concern of the stop sta
- 2019 -
Models from 2019
2019 CHEVROLET MALIBU |
Bulletin No.: PIP5672 Published date: 08/23/2019 Preliminary Information PIP5672 Malfunction Indicator Lamp MIL Illuminated Stop Start Function Not Working With Only DTC P2797 Stored Models Brand: Chevrolet Model: Malibu Model Years: 2019 VIN: from All Engine: to All All Transmissions: MRG Involved Region or Country North America Additional Options (RPO) Condition Cause None Some customers may comment that the MIL is illuminated and the stop start function is not working. Technicians may nd only DTC P2797 set in the Transmission Control Module (TCM). P2797 Auxiliary Transmission Fluid Pump Performance. This condition may be caused by an internal failure in the auxiliary uid pump. Correction: Replace the auxiliary transmission pump if P2797 Auxiliary Transmission Fluid Pump Performance is the only code set. If any other codes are set refer to SI and diagnose those codes first Service Procedure: Refer to: Automatic Transmission Fluid Pump Removal. Note: To remove the pump assembly grasp the turbine shaft and remove the forward clutch and pump assembly as one piece. Keep the clutch assembly inserted in the pump, this will protect the shaft seals and they will not need to be replaced. Refer to Transmission Fluid Pump Disassemble for instruction for replacing the auxiliary pump . Note: The WPC pump assembly comes with “B” seal ring, item # 162 already installed. Parts Information The Automatic Transmission Auxiliary Pump (Qty 1) can be obtained from the Warranty Parts Center (WPC) using the TSP Dealer Request Form located on Global Connect