ATUChassis2019

Service Bulletin Details

Public Details for: ATUChassis2019

Wheel change mode/jacking mode - description and usage


- 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 -

Models from 2006
2006 AUDI A8
Models from 2005
2005 AUDI A8
Models from 2004
2004 AUDI A8
Audi Technical Update
Summer 2019
2
AUDI AG
I/VS
ATU Summer 2019
Agenda
01.
Body
02.
Chassis
03.
Electrical
1.1 Examples of customer misuse
2.1 Wheel change mode/jacking mode
3.1 Alexa in the Audi e-tron quattro
3.2 myAudi map update for MIB2+
Chassis
4
AUDI AG
I/VS
ATU Summer 2019
2.1 Wheel change mode/jacking mode
Topic:
›
Before lifting the vehicle, jacking mode must always be activated in the MMI. This includes all
Audi models with adaptive suspension.
Reason:
›
If the vehicle is not fitted with the original level sensors, it is possible that the suspension
electronics will not register that the vehicle is being raised, and the system will therefore not
be automatically deactivated.
Possible consequences:
›
The system might regulate the height of the vehicle (e.g. build up pressure) when this is not
wanted.
Procedure:
›
MMI  Car  Systems  Service & checks  Air suspension: wheel change.
Example of a defective level sensor.
Thank you!


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.