20A8LS8TCHREPRT
Service Bulletin Details
Public Details for: 20A8LS8TCHREPRT
Vehicle preparation section: changed phone box verbiage. Added install front license plate carrier (if necessary)*
- 2020 -
Models from 2020
2020 AUDI A8 |
2020 AUDI S8 |
2020 A8 L/S8 Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by a certified Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information For items marked with **, follow instructions for stock inventory vehicle Vehicle Preparation Trunk Inspection (continued) Check Elsa for open campaigns and updates Set spare tire pressure* Verify Audi phone box customer registration form is present in vehicle and add the serial number from Elsa (if equipped). See TSB 2051720 Check battery clamps for proper torque* Perform any open campaigns* Perforn diagnostics work* Install front license plate carrier (if necessary)* Exterior Check all key buttons and features* Check all doors for proper power closing* Inspect exterior for damage, dings, dents and surface scratches. Report and repair any damage before delivery to the customer Lighting and Windshield Test exterior lighting functions Test windshield washers (and headlight washers). Correct aim if necessary* Trunk Inspection Verify trunk is operational Verify operation of emergency release handle Install wheel bolt cover removal tool from PDI kit into trunk tool kit* Verify tool kit is installed securely in luggage compartment Effective 10-24-2019-US Version 1.1 Interior Check operation of window, lock, and seat controls* Inspect mirrors for proper operation* Check rear view mirror operation* Verify operation of all interior lights Check heated steering wheel (if equipped, otherwise, ignore DTC B153813) Verify operation of heated/ventilated and massaging seats (if equipped)* Verify operation of manual folding 2nd row Verify proper operation of climate control* Inspect operation of all power outlets* Check panoramic sunroof and sunshade operation* Verify operation of power rear and rear side sunshade operation Verify operation of front Passenger Occupant Detection System Verify operation of heated surfaces (front/rear) (if equipped) Settings Verify operation of MMI® touch screens, upper and lower Set Time source setting to “GPS” and set Auto daylight savings time to “on”* PRE-DELIVERY INSPECTION (PDI) | 1 2020 A8 L/S8 Audi Pre-Delivery Inspection Settings (continued) Driving Performance (continued) Verify and set language and measurement units* Test drive vehicle applying brakes several times Verify Speech Dialog System is operating* Check adaptive air suspension in all positions (if equipped) Set “Music volume while parking” to medium* Check steering/tire alignment Set dealership location in navigation* Turn off Manual Speed Warning (if equipped)* Check for squeaks, rattles and wind noise. Repair any squeaks, rattles or wind noises before delivery to the customer Media / Radio / SAT Calibrate rear view mirror* Verify operation of aux. input (if equipped) Verify quality of radio reception in AM/FM/SiriusXM® bands Verify operation of CD/DVD player (if equipped) Insert SD card and test function of all slots Program the presets to local stations Verify HD Radio is turned “off”* Verify operation of Rear Seat Entertainment (if equipped) Verify Audi phone box sticker and registration information is present (if equipped). See TSB 2051720 Driver Assistance Verify all cruise control functions Verify cruise control/ACC with Stop & Go functionality (if equipped), which includes the following: Adaptive Cruise Assist Turn Assist Intersection Assistant Audi connect® (USA ONLY) Traffic Jam Assist Turn on the Wi-Fi® hotspot (if equipped)* Predictive Efficiency Assist Check Wi-Fi® hotspot visibility. No data available at PDI due to dealer demo mode (if equipped)* Active lane assist with emergency assistant Enable satellite map for navigation (if equipped)* On-Hoist Inspection Remove transport suspension blocks (follow ELSA instructions) Check underside of vehicle for fluid leaks and loose components Traffic sign recognition Verify Audi side assist functionality Pre sense® rear (if equipped) Verify operation of night vision camera (if equipped) Verify operation of parking system* Verify all vehicle Head-up display functionality (if equipped)* Verify operation of High-beam assist Check steering, boots, brake system, hoses, tires and wheels for damage Activate NAV and follow directions back to dealership Install wheel locks (if equipped) Post-Road Test Inspection Install wheel bolt covers and center caps as supplied* Interrogate fault memory and upload diagnostic log to GFF Paperless Server Inspect wheel bolts for proper torque* Set and store tire pressures for either sold vehicle OR stock inventory vehicle* Driving Performance Check service interval and verify correct interval is displayed Check engine oil level* Check all fluid levels and top off if necessary Check horn operation Ensure the yellow tire pressure tag is installed on the steering wheel Verify hold and release of electronic parking brake Apply 30 Day Inventory Maintenance Sticker** Verify engine Start-Stop System functionality* Install showroom charger to ensure battery remains charged at all times** Verify engine performance and acceleration* Verify transmission operation, including shift paddles (if equipped) Effective 10-24-2019-US Version 1.1 PRE-DELIVERY INSPECTION (PDI) | 2 2020 A8 L/S8 Audi Pre-Delivery Inspection Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 10-24-2019-US Version 1.1 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 3