P-SC-2014020003

Campaign No. 2014020003, February 2014
TO:
ALL MERCEDES-BENZ CENTERS
SUBJECT:
Model 204 (C-Class), Model Year 2014
Rework Seam Seal at Spare Tire Well
This Service Campaign has been initiated because Daimler AG (DAG), manufacturer of Mercedes-Benz
vehicles, has determined that the seam seal at the spare tire well may not be to specification. To correct
this condition, an authorized Mercedes-Benz dealer will rework the seam seal at the spare tire well at the
next workshop visit.
Prior to performing this Service Campaign:

Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously
repaired.

Please review the entire Service Campaign bulletin and follow the repair procedure exactly as
described.
Approximately 321 vehicles are affected.
Order No. P-SC-2014020003
This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data
Control, and MBUSA-SLP S424HH001, Control of Quality Records.
2
Procedure
1. Check seal seam in area of spare tire well:

Check seal seam on marked corner area (Figure 1) inside of spare tire well.

Lift vehicle with vehicle lift.

Check seam seal on marked corner area (Figures 1, 3) outside of spare tire well.
Note:

If seal seam is not damaged (both sides OK): Procedure is complete.

If seal seam is damaged: Proceed to steps 2, 3.
Figure 1
2. Thoroughly clean seal seams and then degrease with silicone remover (shop supply).
3. Apply missing seam sealant on outside and inside on spare tire well (Figures 2 and 3).
Figure 2
Figure 3
P-SC-2014020003
3
Primary Parts Information
Qty.
Part Name
Part Number
Estimated Replacement
Rate
As required*
Seam sealant
A 004 989 29 20
5%
* 1 container is sufficient for 20 vehicles. Submit as local purchase SEA00159, handling is included.
Note:

Please be aware that only the part number(s) referenced in the Campaign Bulletin is/are
approved for use to repair the vehicle. Repairs performed using any other part(s) will not
have been performed in accordance with the campaign. Accordingly, warranty claims
submitted with reference to an improper part number(s) will be denied.

The following allowable labor operation should be used when submitting a warranty claim
for this repair:
Warranty Information
Repair 1
Operation: Check spare tire well seal seam (02-8390).
Damage Code
64 900 38 8
Operation Number
02-8390
Labor Time (hrs.)
0.1
Repair 2
Operation: Check spare tire well seal seam (02-8390).
Rework spare tire well seal seam (02-8391).
Damage Code
64 900 38 7
Operation Number
02-8390
02-8391
Note
Operation Number labor times are subject to change.
P-SC-2014020003
Labor Time (hrs.)
0.1
0.2