2057041/1

Technical product information
Topic
Market area
Brand
Transaction No.
Level
Status
Release date
Bentayga Kovomo V8 - PDI - Basic settings procedure
United States E05 Bentley USA and rest America (6E05)
Bentley
2057041/1
EH
Draft
New customer code
Object of complaint
Complaint type
vehicle service -> vehicle diagnosis -> guided fault finding control units, services -> with event log entry
vehicle service -> vehicle diagnosis -> guided fault finding control units, services -> without event log entry
engine -> operation, engine control
control units, services
Vehicle data
Bentayga Kovomo V8
Sales types
Type MY Brand Designation Engine code Gearbox code Final drive code
4V14D9 2020 E
*
*
*
Documents
Document name
master.xml
Position
Technical product information
Bentayga Kovomo V8 - PDI - Basic settings procedure
Transaction No.: 2057041/1
Customer statement / workshop findings
IMPORTANT: In the event the readiness code is as shown in Figure 1, no further action is required
If the any of the eight characters are not zero, carry out the instructions within this TPI
Figure 1
Technical background
Please make sure you have installed the latest ODIS diagnostic software version (Figure 2) before carrying out the instructions within the
Measure section of this TPI
New ODIS version 5.1.6 / 2.26.11 or above
Figure 2
The following procedures must be conducted:
•
Throttle adaption
•
Exhaust flaps adaption
•
DMTL Basic settings
•
Readiness code test
Production change
Not applicable
Measure
1) Carry out a Guided Fault Finding Sweep of all control modules
•
Clear all DTC’s
Some DTC’s may not clear as they are related to the Basic settings procedures which must be conducted within this TPI
2) Referring to Figure 3 - Navigate to the Engine control module 1
•
Navigate to Basic settings
Select Execute
Figure 3
3) Referring to Figure 4 - Select -2- Throttle adaption
•
Follow all remaining screen prompts until completion
Figure 4
4) Referring to Figure 5 - Select -4- Exhaust flaps adaption
•
Follow all remaining screen prompts until completion
Figure 5
5) Referring to Figure 6 - Select -5- Tank leak diagnosis – DMTL (NAR vehicles only)
•
Follow all remaining screen prompts until completion
Figure 6
6) Erase all DTC’s IMPORTANT: Ensure all related DTC’s are erased prior to carrying out the Readiness code test
7) Referring to Figure 7, Navigate to Readiness code (Point A)
•
Select Execute (Point B)
Figure 7
•
Follow all remaining instructions until the Readiness code procedure is complete (Figure 8)
Figure 8
Warranty accounting instructions
Warranty type
910 or 110
Labour Operation Code 01 29 00 08
Damage Service number 24 70
Damage Code
00 55
Time
80 Time units