PIP5402E

Service Bulletin Details

Public Details for: PIP5402E

This preliminary information communication provides the technician with the diagnosis and repair steps for a vehicle with a check engine light on with diagnostic trouble code P015B or a reduced engine power message with diagnostic trouble c


- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -

Bulletin No.: PIP5402E
Published date: 10/22/2019
Preliminary Information
PIP5402E Check Engine Light MIL P015B, P1101 and /or P0101
Reduce Engine Power
Product Investigation Review Required
Models
Brand:
Model:
Model Years:
VIN:
from
Engine:
to
Transmissions:
Buick
Regal
2013 - 2019
All
All
2.0L LTG/LHU
All
Buick
Envision
2017 - 2019
All
All
2.0 LTG
All
Buick
Verano
2013 - 2016
All
All
2.0 LHU
All
Cadillac
ATS
2013 - 2019
All
All
2.0 LTG
All
Cadillac
CT6
2016 - 2019
All
All
2.0 LTG
All
Cadillac
CTS
2014 - 2019
All
All
2.0 LTG
All
Chevrolet
Camaro
2016 - 2019
All
All
2.0 LTG
All
Chevrolet
Equinox
2018 - 2019
All
All
1.5 LYX and 2.0 LTG
All
Chevrolet
Malibu
2013 - 2019
All
All
1.5 LFV and 2.0 LTG
All
GMC
Terrain
2018 - 2019
All
All
1.5 LYX and 2.0 LTG
All
Supersession Statement
This PI was superseded to update Recommendation/Instructions. Please discard PIP5402D.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition / Concern
A customer may have a concern of the check engine lamp being illuminated and/or reduced
engine power. When the technician scans the vehicle, diagnostic trouble codes P015B and/or
P1101 will be set current or in history.
Recommendations / Instructions
After following normal SI diagnostics, if a solution is not found, inspect for a missing/damaged O-ring seal in the
charge air cooler coupler.
This coupler is located on the passenger side of the charge air cooler where the air duct slips into it.
The arrows in the picture below are pointing to the O-ring seal being discussed.
Note: It might be helpful to use the GE-52250 Power Smoke Diagnostic Leak Detector and introduce smoke into
the induction/charge air cooler system to assist with isolating any further system leaks. Allow several minutes for
the smoke to move throughout the system, switching between air and smoke may help speed up the
process. Visually inspect all related induction system components for signs of smoke indicating a potential leak.
The picture below is from an ATS. Other models are similar.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is
resolved without completing every step, the remaining steps do not need to be performed.
© 2019 General Motors. All Rights Reserved.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.