NTB19-101
Service Bulletin Details
Public Details for: NTB19-101
2019-2020 pathfinder; push button ignition and door request switches inoperative if you confirm all of the conditions listed below are occurring on an applied vehicle with the intelligent key within range. I?? - the doors will not lock
Models from 2020
2020 NISSAN PATHFINDER |
Models from 2019
2019 NISSAN PATHFINDER |
Classification: EL19-042 Reference: Date: NTB19-101 November 7, 2019 2019-2020 PATHFINDER; PUSH BUTTON IGNITION AND DOOR REQUEST SWITCHES INOPERATIVE APPLIED VEHICLES: 2019-2020 Pathfinder (R52) APPLIED VIN AND DATE: 2019 Pathfinder All 2020 Pathfinder built before 5N1(*)R2(*)(*)(*)LC 589857 IF YOU CONFIRM All of the conditions listed below are occurring on an Applied Vehicle with the Intelligent Key within range. The doors will not lock/unlock when the request switch on an exterior door handle is pressed. The doors will lock/unlock when the respective buttons are pressed on the Intelligent Key. The engine will not start when the ignition switch is pressed while depressing the brake. The engine will start when pressing the Remote Engine Start (RES) button on the Intelligent Key. The engine will start when pressing the ignition switch while holding the Intelligent Key in front of it. ACTION Replace the BCM. Refer to the Electronic Service Manual (ESM) for the procedure to replace the BCM: ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BCM > REMOVAL AND INSTALLATION > BCM (BODY CONTROL MODULE) Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/2 PARTS INFORMATION DESCRIPTION PART NUMBER QUANTITY BCM 284B1-9NR3A 1 CLAIMS INFORMATION Submit a Primary Part (PP) type line claim using the following claims coding: (1) (2) DESCRIPTION PFP OP CODE SYM DIA FRT Replace BCM (1) RD94AA ZE 32 (2) Reference the electronic parts catalog and use the BCM Assembly as the Primary Failed Part (PFP). Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat Rate Time (FRT). AMENDMENT HISTORY PUBLISHED DATE REFERENCE November 7, 2019 NTB19-101 DESCRIPTION Original bulletin published 2/2 NTB19-101